Panasonic SOUNDSLAYER SC-GNW10, Руководство пользователя

Страница: 11 / 23

Before use
11
Fit the unit
Fit the unit by putting it around your shoulders, taking care of how it is
positioned.
Wirelessly connecting the unit and the transmitter
Before turning on the unit, connect the transmitter and a device with the USB cable. (The operation indicator of
the transmitter blinks (cyan) to indicate this state)
Press and hold the [ Í ] button for about 2 seconds until the operation indicator (R) blinks
(cyan).
The wireless connection between this unit and the transmitter starts.
When the wireless connection is completed, the unit and the transmitter are in the following states:
*1 If the “Lighting Settings” in the app for use in Windows are set to “OFF”, the indicators turn off after about 3
seconds.
*2 Blinks (red) when the battery level drops to 20 %.
To turn the unit off
Press and hold the [
Í
] button for about 2 seconds until the operation indicator (L) blinks 3 times.
• The operation indicator (L) turns off and the power of the unit turns off.
Note:
• If the unit and the transmitter do not connect wirelessly, try pairing again. ( l 14)
• If the sound is distorted, turn down the volume.
• If there is an excessive input signal, the function of this unit may stop automatically and the power may be turned off
for safety.
• When connected wirelessly, if there is no sound for 5 minutes or more, this unit automatically turns off. (Auto off
function)
• The auto off function may not work in some cases when there is noise from other devices.
• The settings for the auto off function can be changed in the app for use in Windows. (
l 14) (Factory default: on)
Turn on the unit
This unit Operation indicator (L) Lights (cyan)
*1
Operation indicator (R) Lights (cyan)
*1*2
Transmitter Operation indicator Lights (cyan)