No play.
No sound or there
is a lot of noise.
Disc rotation stops
and starts during
play.
Operation sounds are
heard from the unit.
1
≥
The HOLD function is on. Cancel HOLD (
➪
page 5).
≥
The batteries may be depleted (
➪
page 4).
≥
The disc isn’t correctly set.
≥
The disc is scratched or dirty. (Tracks may be skipped
particularly with MP3 discs.)
≥
There is moisture on the lens. Wait for about an hour
and then try again.
≥
The lens is dirty: clean it with a blower (recommended
product:
SZZP1038C
). You cannot use a CD type lens
cleaner. If the lens gets marked with fingerprints, gently
wipe them off with a cotton swab.
≥
The unit may not read a track properly if shaken
strongly during disc reading.
≥
If there is no data between sessions on a multi-session
disc, play may not be possible.
≥
If there is a large amount of JPEG data etc. within a
MP3 file, sound may be muted and play may not be
possible.
≥
If the disc contains data with different formats, sound
may be muted and play may not be possible.
≥
If a CD-ROM format disc contains MP3 and other files,
only the MP3 files will be playable.
≥
Ensure the plugs are inserted firmly.
≥
Wipe the plugs with a clean cloth.
≥
The disc is scratched or dirty.
≥
The sound may be interrupted or there may be noise
when playing MP3 if the recording quality is poor.
≥
The elapsed play time disappears and sound is
interrupted if bumps continue repeatedly.
≥
Separate the unit from mobile telephones.
Disc rotation stops and starts to save power.
There is some sound heard when a disc is being
accessed or disc rotation starts.
Model No.
SL-SX470
Dear Customer
Thank you for purchasing this product.
Before connecting, operating or adjusting this product,
please read the instructions completely.
Please keep this manual for future reference.
RQT8252-P
F0705UM0
P
Operating Instructions
Portable CD Player
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart do not solve the
problem, refer to the “Customer Services Directory” on page 3.
≥
This doesn’t work during random play.
≥
It may not work correctly under some conditions.
≥
If the batteries are depleted, removed, or the unit is
subjected to strong shock, resume function is canceled.
≥
Random play modes may be on (
➪
page 5).
≥
Play resumes from where last stopped (
➪
page 5).
You cannot search through a disc with MP3 files.
You may not be able to specify point A or B at the end of
a disc.
If [
:
] or [
9
] is pressed before [MEMO] you
cannot change the mode.
Depending on the type of MP3 disc recording, the effect
may not appear.
You cannot skip from the last to first album, or vice
versa, during play.
The indicator may not appear correctly under certain
conditions.
Remove then insert the batteries again.
If the batteries are depleted, removed, or the unit is
subjected to strong shock, all settings are canceled, and
the volume is reset to 10.
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
C
2005 Matsushita Electric Industrial Co., Ltd.
Printed in China
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way Secaucus, New Jersey 07094
http://www.panasonic.com
and indicate limitations
on these discs only.
MP3
CD-DA
p
Play doesn’t
resume from the
last point stopped.
Play doesn’t start
from the first
track.
Cannot search
through tracks.
Cannot specify
point A or B.
Cannot change the
Digital Re-master
mode, anti-skip
mode.
Digital Re-master
does not work.
Cannot skip
albums.
The battery
indicator fails to
appear or is
incorrect.
The unit stops
working.
All settings are
canceled.
rqt8252-p.qxd 05.7.19 5:21 PM ページ1
