background image

Using the unit with a car audio
system

SL-SW891C comes with a car adaptor and car stereo
cassette adaptor.

Items to be purchased
(SL-SW895/SL-SW890)

For connection to the car audio system:

Car stereo cassette adaptor (SH-CDM10A)

For securing the unit and connecting the
power supply:

Car adaptor (SH-CDC9)

Car mounting kit (SH-CDF20)

Note

.

It may not be possible to use the unit with some types of
car stereo owing to restrictions imposed by the con-
struction of the car stereo cassette adaptor.

For further details, refer to the instructions of the part
concerned.

The thinner and lighter construction makes the unit
less susceptible to vibration.

An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.

A recovery system immediately returns the laser pick-
up to its original position if it is knocked off the track by
a strong shock.

The 40-second anti-skip memory fills in interruptions
caused by bumps and vibrations. 

Press during play or stop mode.

The following indicator appears on the display panel.

Note

!

Wait until the jogger indicator appears before starting to
jog. 

When bumps continue repeatedly

The message “SORRY” appears on the display and
sound is interrupted.

The jogger indicator can also flash or go out under
the following conditions:

As the end of the last track approaches.

As the end of a track approaches during random play, pro-
gram play, and 1 track repeat play.

If the track in play or next track is extremely short.

To cancel the anti-skip function

Press [A.SKIP] again.

Note

!

The anti-skip setting can be changed during play, but
this may cause a slight interruption in the sound be-
cause the disc’s rotational speed changes.

During anti-skip operation, the disc rotates at a higher
rate than usual in collecting extra audio data. This
could result in a slight increase in disc rotation noise.

Listening to sound with the unit con-
nected to an audio system

The anti-skip function uses digital signal compression
technology. It is recommended that the anti-skip func-
tion be canceled if the unit is connected to a home
audio system.

Skipping

tracks

Searching

through tracks

To adjust the

volume

A.SKIP

A.SKIP

A.SKIP

5

Using the Unit with Optional Accessories

Using the unit with an audio system

Using a stereo connection cable (not included), you can
listen to CDs through your audio system.

Connect the cable to the amplifier after turning off its
power.

Do not connect the cable to the PHONO jacks on the
amplifier.

Obtain the optional connecting cable if the amplifier
comes with mini-phone jacks.

Adjust the volume level on the amplifier.

You can connect speakers, active or otherwise, with an
impedance of 1k

or less to the headphone jack. Set

the unit’s volume between 5 and 8.

Note

.

Sound quality changes when S-XBS or VMSS 
(SL-SW895 only) is selected, but volume is reduced 
by approximately fifty percent.

L

R

OUT jack

Stereo connection cable (not included)

To CD or AUX
terminals

(White)

(Red)

Side panel of the unit

Amplifier

Connect the car stereo cassette adaptor
to the unit’s headphone jack. 
(When doing this, keep the unit’s VOLUME
control at a setting between 5 and 8.)

RQT5963

Maintaining the
Lens

Open the lid and clean the lens as shown in the figure.
Use a cotton swab to gently wipe off any finger-prints.
Recommended product: Lens cleaner kit (SZZP1038C)

Lens

Lens

Air blower for
camera lens

Anti-Skip System

Using Stereo Headphones with Remote Control 

SL-SW895 ONLY

To start play

To stop play

To turn off 

the unit

The remote control can be operated regardless of the
HOLD mode of the unit.

Preparation: Release the remote control from the
HOLD mode.

Operation confirmation tones

When an operation button is pressed, a confirmation
tone sounds. Refer to the parentheses in the illustra-
tion for the different types of confirmation tones.

How to use the remote control

Press once during off or stop mode.

Press once during play.

Press and hold during play or stop mode.

Press once during play.

Press and hold during play.

[VOL] on the remote control adjusts volume
only. To adjust the VMSS effect, use 
[VOLUME] on the main unit.

VOL

HOLD

HOLD

VOL

HOLD

VOL

HOLD

VOL

HOLD

VOL

HOLD

VOL

HOLD

G

A.SKIP

After about
20 seconds

A.SKIP

Play/stop/off button

[

i

]

[

j

]

[VOL]

About
5 seconds later

The jogger indicator starts flashing.

(Beep)

(Beep...Beep)

(Beep...Bee...p)

Forward
(Beep
Beep)

Backward
(Beep Beep
Beep)

SL-SW895 ONLY

To prevent the disc from being scratched or
damaged

Remove built up dust from the felt pads.

Felt pads

Содержание SL-SW891C









Отзывы: