Panasonic SF4D-TM1 Скачать руководство пользователя

Страница: 8 / 96

Introduction

1-1 Safety Cautions

Always observe

This section explains important rules that must be observed to prevent human injury and prop

erty damage.

■ The hazards that may occur if the product is used incorrectly are described and classified by

level of harm.

WARNING

Risk of death or serious injury.

CAUTION

Risk of minor injury or property damage.

<Reference>

A "Reference" provides additional information for more effective use of the

product.

■ Use this product within the specifications. If the product is modified, functionality and perfor

mance cannot be assured.

■ This product has been developed and manufactured for industrial use only.

■ This product is suitable for indoor use only.

■

The product is not designed for use in the following conditions and environments. If use of

the product in any of these conditions or environments is unavoidable, consult us.

1) Use in conditions or environments not described in this manual.

2) Use for nuclear power control, railroad facilities, air navigation facilities, vehicles, combus

tion facilities, medical systems, or space development.

■ Risk of damage if the product is dropped or otherwise subjected to strong shock.

■

When disposing of the product, dispose as industrial waste.

WARNING

♦

Machine designers, responsible persons for installation, responsible persons for use,

and machine users

● Machine designers, responsible persons for installation, responsible persons for use, and

machine users must observe applicable laws and regulations relating to installation and

use of the device, and follow the instructions in the manual for installation, maintenance,

and inspection.

●

Whether this device functions as designed, and whether system devices, including this

one, comply with safety standards, depends on the suitability of the application, installa

tion, maintenance, inspection, and method of operation of the device. The machine de-

signer, responsible person for installation, responsible person for use, and machine user

are responsible for these matters.

♦

Expert engineer

● An expert engineer is a person such as a machine designer, responsible person for instal

lation, or responsible person for use who has been professionally trained, has comprehen

sive knowledge and experience, and is able to solve the various problems that may occur

as work is performed.

♦

Operator

● To enable correct operation of the device, the operator should read and understand the

contents of this manual and perform work according to the procedures described therein.

●

In the event that the device does not operate correctly, the operator should immediately

stop operation and report the problem to the responsible person for use. Do not operate

the machine until it has been verified that normal operation has been restored.

Содержание SF4D-TM1

































































































Результаты поиска

Содержание SF4D-TM1

Отзывы:

Похожие инструкции для SF4D-TM1

Бренды по названию

Популярные бренды

Panasonic SF4D-TM1, Руководство пользователя

Результаты поиска

Содержание SF4D-TM1

Отзывы:

Похожие инструкции для SF4D-TM1

Бренды по названию

Популярные бренды