Panasonic SF4D-TM1 страница 78 Скачать руководство пользователя

Страница: 78 / 96

Functions

5-4 Blanking function

5-4-1 Fixed Blanking Function

This function is used to prevent the light curtain's control output (OSSD 1 / 2) from turning OFF

when a specific beam axis is blocked.

Use this function when an obstacle always blocks a particular beam axis.

Setting methods include teaching setting, manual setting, and initialization setting.

●

Teaching setting

When teaching is used, beam axes that are blocked during teaching are set as valid axes of

the fixed blanking function.

To use this method, the emitters of the light curtain must be emitting light. Setting is not pos

sible when light is received (or blocked) in all beam axes.

●

Manual setting

Set fixed blanking function valid / invalid for each beam axis.

●

Initialization setting

The fixed blanking function becomes invalid. (Factory setting)

WARNING

When the fixed blanking function is used, the light curtain's control output (OSSD 1 / 2) does not

turn OFF when a specific beam axis is blocked. Use a protective structure to prevent arrival at the

machine's danger zone from the sensing area of the specific beam axis.

Before countermeasure

Emitter

Receiver

Beam axes on which fixed

blanking function is set

Obstacle

Danger zone

Emitter

Receiver

Beam axes on which fixed

blanking function is set

After countermeasure

Protective structure

CAUTION

● If light is received from the emitter to a beam axis for which the fixed blanking function is set, the

light curtain's control output (OSSD 1 / 2) becomes fixed at OFF. Check installation conditions

and turn the power OFF then ON. (The fixed blanking function will remain valid after the power

is turned OFF then ON.)

● When the fixed blanking function is used, the light curtain's digital indicator / received light

amount (green) remains OFF regardless of the intensity of light received.

Содержание SF4D-TM1

































































































Результаты поиска

Содержание SF4D-TM1

Отзывы:

Похожие инструкции для SF4D-TM1

Бренды по названию

Популярные бренды

Panasonic SF4D-TM1, Руководство пользователя

Результаты поиска

Содержание SF4D-TM1

Отзывы:

Похожие инструкции для SF4D-TM1

Бренды по названию

Популярные бренды