background image

5. Communicating Within Your Office

56

ICX (International), issued March 1999

ICX-35-750

2.  Do one of the following:

3.  If setting Call Forwarding for another extension, enter the number of the 

extension whose calls you are forwarding. Otherwise, proceed to step 4.

4.  Enter the destination code:

• If you are forwarding to another extension, enter the extension number.

• If you are forwarding to an outside number, press the # key and enter the 

system speed dial code.

5.  Replace the handset or press the ON/OFF key.

1.  Pick up the handset or press the ON/OFF key.

2.  Do one of the following:

To forward . . .

Do . . . 

All incoming calls

Enter the appropriate Call Forwarding - All Calls Set 
code:

For your extension, enter 721 (HK/UK) or 721# 

For another extension, enter 741 (HK/UK) or 
741#

All incoming calls that ring a 
busy extension

Enter the appropriate Call Forwarding - Busy Set code:

For your extension, enter 722 (HK/UK) or 722#

For another extension, enter 742 (HK/UK) or 
742#

All incoming calls that ring an 
extension that doesn’t answer

Enter the appropriate Call Forwarding - No Answer Set 
code:

For your extension, enter 723 (HK/UK) or 723#

For another extension, enter 743 (HK/UK) or 
743#

To cancel call forwarding . . .

Do . . . 

For all incoming calls

Enter the appropriate Cancel Call Forwarding - All Calls 
code:

For your extension, enter 731 (HK/UK) or 731#

For another extension, enter 751 (HK/UK) or 
751#

     To cancel Call Forwarding

Содержание Section750



























































































Отзывы: