Panasonic Section 700 Скачать руководство пользователя страница 167

Страница: 167 / 394

Section 700 - Operation

Chapter 4. Key Telephone Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

4-51

To check a programmed FF key:

1. Press

the

ON/OFF

key:

• The phone issues intercom dial tone.

• The

ON/OFF

LED lights.

2. Press

the

CONF

key.

“C” appears in the display.

3. Press the FF key to be checked.

The programmed data appears on the display.

4. Press

the

ON/OFF

key.

• The

ON/OFF

LED goes off.

• The date and time appear on the display.

Related Programming

• FF5 (FF Keys): FF Key Assignments for Extensions

• FF9 (Copy Program): FF Key Copy

Considerations

• The following functions can be assigned to FF keys:

Table 4-6. Feature access codes for FF key assignments

Feature

Code to be entered

Call Attendant

Intercom Call

Extension number (10-69) or (100-699)

Outside Line

88, outside line number (01-64)

Pooled Trunk Access

Outside line group number (89, 81-86)

Note:

“9” can be used as an outside line group number if it

is not used for LCR.

LCR

Paging

#, Paging Group number (00-07)

Call Park

Call Park Retrieve

Содержание Section 700











































































































































































































































































































































































































Результаты поиска

Содержание Section 700

Отзывы:

Panasonic Section 700, Руководство пользователя, Страница: 167 / 394

Результаты поиска

Содержание Section 700

Отзывы: