manualshive.com logo in svg

Panasonic Section 700, Руководство пользователя

Поделиться
Скачать
Panasonic Section 700 Скачать руководство пользователя страница 111

Section 700 - Operation

Chapter 3. System Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  Page 3-65

Related Programming

• FF1 (System): Extension Class of Service Setting

• FF1 (System): Ring Patterns for UNA Terminals (M, C, & B)

• FF3 (Extension): Extension Class of Service Assignment

• FF4 (Ringing and Hunt Groups): CO Day Ring Assignment

• FF4 (Ringing and Hunt Groups): CO Night Ring Assignment

Hardware Requirements

• An external ringing device is not provided with the DBS. It can be 

purchased separately from an electronics dealer.

• External paging speakers are not provided with the DBS; they must be 

purchased separately.

Considerations

• With CPC-A and CPC-AII, extension port 73 is used to assign ringing to 

an external page/UNA interface.

• With CPC-B, extension port 145 is used to assign ringing to an external 

page/UNA interface.

Voice Mail Ringing

(CPC-AII and CPC-B Version 3.1 or higher)

Description

The Voice Mail Ringing feature allows calls from a DBS Automated 
Attendant or from an ACD port to ring an extension with the same ring tone 
as a CO trunk. The ring pattern is selected in the Extension Distinctive 
Ringing program. If a distinctive ringing pattern is not specified, the ringing 
pattern will be two seconds on/two seconds off.

Related Programming

• FF3 (Extension): Extension Ring Pattern

Содержание Section 700











































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды