manualshive.com logo in svg

Panasonic Section 700, Техническое руководство

Поделиться
Скачать
Panasonic Section 700 Скачать руководство пользователя страница 287

Section 700 - Operation

Chapter 7. SLT Features

ICX-35-700

ICX (International), issued March/1999

 287

Paging

CPC-96, CPC-288, and CPC-576 All Versions

Description

The System allows you to make both internal and external pages and announcements. Internal pages 
are made via the System’s key telephone speakers. External pages are made through the speakers of 
an external paging system connected to the System.

Paging calls can be answered from any extension using the Meet-Me Answer feature.

Operation

To make a page:

Meet-Me Answer

To answer a page using Meet-Me Answer:

Hardware Requirements

•

External relays, amplifier, and speakers are required for external paging. 

Considerations

•

If an external paging system has been connected, pages can be made to Paging groups 0-9 
through the external speakers. Voice paging can also be heard over the extensions in groups 0-9.

•

An extension can belong to more than one paging group.

•

Only one page may be performed at a time. If you attempt to make a page while another 
extension is paging, you will receive a busy signal unless your system allows Paging Override.

Action

Result

1.   Lift the handset.

Intercom dial tone

2.   Enter the Group Paging code (default = #).

3.   Enter the number of the desired Paging group (0-9).

4.   Make your announcement.

5.   Replace the handset.

Action

Result

1.   Lift the handset.

Intercom dial tone

2.   Enter the Meet Me Answer code (default = ##).

Connected to specified party

Содержание Section 700
























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды