background image

26

RQT9763

Limited Warranty 

(ONLY FOR U.S.A. AND PUERTO RICO)

Panasonic Consumer Marketing Company of North America, 
Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus, New Jersey 07094

Panasonic Products Limited Warranty

Limited Warranty Coverage
(For USA and Puerto Rico Only)

If your product does not work properly because of a defect in materials or 
workmanship, Panasonic Consumer Marketing Company of North America 
(referred to as “the warrantor”) will, for the length of the period indicated on 
the chart below, which starts with the date of original purchase (“warranty 
period”), at its option either (a) repair your product with new or refurbished 
parts, (b) replace it with a new or a refurbished equivalent value product, or 
(c) refund your purchase price. The decision to repair, replace or refund will 
be made by the warrantor.

During the “Labor” warranty period there will be no charge for labor. During 
the “Parts” warranty period, there will be no charge for parts. This Limited 
Warranty excludes both parts and labor for non-rechargeable batteries, 
antennas, and cosmetic parts (cabinet). This warranty only applies to 
products purchased and serviced in the United States or Puerto Rico. This 
warranty is extended only to the original purchaser of a new product which 
was not sold “as is”.

Mail-In Service

For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please 
ship the product prepaid to: 

Panasonic Exchange Center

4900 George McVay Drive

Suite B

McAllen, TX 78503

[email protected]

Online Repair Request

To submit a new repair request and for quick repair status visit our Web Site 
at www.panasonic.com/repair.

When shipping the unit, carefully pack, include all supplied accessories listed 
in the Owner’s Manual, and send it prepaid, adequately insured and packed 
well in a carton box. When shipping Lithium Ion batteries please visit our 
Web Site at www.panasonic.com/BatteryHandling as Panasonic is 
committed to providing the most up to date information.

 

Include a letter 

detailing the complaint, a return address and provide a daytime phone 
number where you can be reached. A valid registered receipt is required 
under the Limited Warranty.

IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE 
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/
PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT 
PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED 
FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF 
OF PURCHASE.

Limited Warranty Limits And Exclusions

This warranty ONLY COVERS failures due to defects in materials or 
workmanship, and DOES NOT COVER normal wear and tear or cosmetic 
damage. The warranty ALSO DOES NOT COVER damages which occurred 
in shipment, or failures which are caused by products not supplied by the 
warrantor, or failures which result from accidents, misuse, abuse, neglect, 
mishandling, misapplication, alteration, faulty installation, 

set-up adjustments, misadjustment of consumer controls, improper 
maintenance, power line surge, lightning damage, modification, introduction 
of sand, humidity or liquids, commercial use such as hotel, office, restaurant, 
or other business or rental use of the product, or service by anyone other 
than a Factory Service Center or other Authorized Servicer, or damage that 
is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED 
UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR 
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS 
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS 
WARRANTY. 

(As examples, this excludes damages for lost time, travel to and from the 
servicer, loss of or damage to media or images, data or other memory or 
recorded content. The items listed are not exclusive, but for illustration only.)

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE 
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD 
OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or 
consequential damages, or limitations on how long an implied warranty lasts, 
so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other 
rights which vary from state to state. If a problem with this product develops 
during or after the warranty period, you may contact your dealer or Service 
Center. If the problem is not handled to your satisfaction, then write to the 
warrantor’s Consumer Affairs Department at the addresses listed for the 
warrantor.

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS 
LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

As of October 2012

Product or Part Name

Parts

Labor

Home Theater Audio System

1 Year

1 Year

All included Accessories
(Except Non-Rechargeable Batteries)

90 Days

Not
Applicable

Only Non-Rechargeable Batteries

10 Days

Not
Applicable

Customer Services Directory (United States and Puerto Rico)

Obtain Product Information and Operating Assistance; locate 
your nearest Dealer or Service Center; purchase Parts and 
Accessories; or make Customer Service and Literature requests 
by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo

You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, 
Saturday-Sunday 10am-7pm EST

For hearing or speech impaired TTY users, TTY: 1-877-833-8855 

Accessory Purchases (United States and Puerto Rico)

Purchase Parts, Accessories and Instruction Books online for all 
Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
[email protected]
You may also contact us directly at:
1-800-332-5368 (Phone)  1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)

For hearing or speech impaired TTY users, TTY: 1-866-605-1277 

The model number and serial number of this product can be 
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for future 
reference.

MODEL NUMBER

SERIAL NUMBER

User memo:

DATE OF PURCHASE ______________________________
DEALER NAME ___________________________________
DEALER ADDRESS________________________________
_________________________________________________
TELEPHONE NUMBER _____________________________

SC-HTB65_70PPC_RQT9763-1P.book  Page 26  Thursday, February 7, 2013  4:24 PM

Содержание SCHTB70





























Отзывы: