RQ
TX01
36
35
T
roub
le
sh
oo
tin
g g
ui
de
(Continued on next page)
Picture
The picture on the television is
not displayed correctly or
disappears.
≥
The unit and television are using different video systems. Use a multi-system or PAL television.
≥
The system used on the disc does not match your television.
– PAL discs cannot be correctly viewed on an NTSC television.
– This unit can convert NTSC signals to PAL 60 for viewing on a PAL television (“NTSC Disc
Output” in “Video” menu).
≥
Ensure that the unit is connected directly to the television, and is not connected through a video
cassette recorder.
≥
Mobile telephone chargers can cause some disturbance.
≥
If you are using an indoor television antenna, change to an outdoor antenna.
≥
The television antenna wire is too close to the unit. Move it away from the unit.
≥
Change “Source Select” in Picture Menu.
[DivX]
≥
Picture may not be seen when more than 4 devices are connected with HDMI cables. Reduce the
number of connected devices.
≥
When using the COMPONENT VIDEO OUT terminal, ensure that progressive output is not
selected when the connected television is not progressive compatible. Press and hold [CANCEL]
until the picture is displayed correctly. (The output will return to “480i” or “576i”.)
≥
When using the HDMI AV OUT terminal, ensure that video output unacceptable with the connected
television is not selected. Press and hold [CANCEL] until the picture is displayed correctly. (The
output will return to “480p” or “576p”.)
≥
When using SCART (AV) terminal, set “Video Mode” in the “HDMI” menu to “Off”.
—
—
24
6
—
—
—
21
—
21
21
25
Picture stops.
[DivX]
≥
Picture may stop if the DivX files are greater than 2 GB.
—
Picture size does not fit the
screen.
≥
Change “TV Aspect” in the “Video” menu.
≥
Use the television to change the aspect. If your television does not have that function, change “4:3
Aspect” in Display Menu.
≥
Change the Zoom setting. (“Just Fit Zoom” or “Manual Zoom” in Display Menu)
24
22
22
Menu is not displayed correctly.
≥
Restore the zoom ratio to “
a
1.00”. (“Manual Zoom” in Display Menu)
≥
Set “Subtitle Position” in Display Menu to “0”.
≥
Set “4:3 Aspect” in Display Menu to “Normal”.
22
22
22
Auto zoom function does not work
well.
≥
Turn off television’s zoom function.
≥
Use the other preset aspect ratios or manual adjustment.
≥
Zoom function may not work well, especially in dark scenes and may not work depending on the
type of disc.
—
22
—
When playing PAL disc, picture
distorted.
≥
Set “Transfer Mode” in Picture Menu to “Auto”.
21
iPod with Universal Dock for iPod (optional)
Cannot charge or operate even
when the indicator on the dock
lights.
≥
Check that the iPod is connected firmly.
≥
The battery of the iPod is depleted. Charge the iPod, and then operate again.
30
—
HDMI or progressive video
There is ghosting when HDMI or
progressive output is on.
≥
This problem is caused by the editing method or material used on DVD-Video, but should be
corrected if you use interlaced output.
– When using the COMPONENT VIDEO OUT terminal, set “Video Output Mode” in Picture Menu to
“480i” or “576i”. (Alternatively, press and hold [CANCEL] to switch to “480i” or “576i”.)
– When using the HDMI AV OUT terminal, set “Video Output Mode” in Picture Menu to “480i” or
“576i” output marked with an “
¢
”. Or, disable the HDMI AV OUT connection and use other video
connections. Make the settings in the following order:
1 Set “Video Mode” in the “HDMI” menu to “Off”.
2 Set “Video Output Mode” in Picture Menu to “480i” or “576i”. (Alternatively, press and hold
[CANCEL] to switch to “480i” or “576i”.)
21
21,
25
Pictures not in progressive
output.
≥
Select “480p” or “576p” in “Video Output Mode” in Picture Menu.
≥
The unit’s SCART (AV) terminal outputs an interlaced signal even if “PRG” is displayed.
21
6
0136En_p26-40.fm Page 35 Monday, January 7, 2008 8:04 PM
