E
N
G
L
IS
H
Using the A U X IN input
You can change the input level etc. when you listen to
the audio from a portable audio player etc. connected to
AUX IN terminal.
Using the PC input
You can play back music on the PC with this system’s
speakers by connecting a PC to the PC IN terminal on
the main unit.
Listening to audio from a PC
1
D isco n n e ct the AC m ains lead.
2
C onnect th e main u n it and a PC.
Preparation
Connect the external equipment to AUX IN terminal.
To adjust the input level
You can adjust the input level.
1
Press [SOUND] repeatedly to select
“ INPUT LEVEL” .
2
Press «
►] to se lect “ LOW " o r “ HIGH” and
then press [О К].
<
Note:
• The factory default is ‘ HIGH’.
• Select “ LOW” if the sound is distorted during ‘ HIGH ’ input
level.
• Read the operating instructions of the external music
device for details.
• Components and cables are sold separately.
AUX-IN auto play
The system will automatically switch to AUX source
when it detects the signal from an external music device.
This function also works in standby mode.
1
Press [RADIO, EXT-lN] repeatedly to se le ct
“ AU X ” .
2
P ress [SETUP] re pe a te d ly to se lect
“ AUX-IN AUTO PLAY” .
3
Press
[<►]
to se lect “ ON” and then press [О К].
Note:
• The factory default is “OFF'.
• This function does not work when the volume of the
external music device is low. increase its volume.
• When the function is switched off and every time you switch to
AUX source. “AUX-IN AUTO PtAY IS OFF’ will be shown once
8 • Stop or pause the external music device before you change
о
to other music source or to stan dby mode so as to prevent
g
the automatic switch to AUX source,
о • When you use thisfunction in standby mode, itmay require
r-
some seconds to be output the sound.
• If this function is set to “ON ”, the standby power
1 2
consumption will increase. (Approx. 0.15 W)
Before co nn e ctin g to a PC
Follow' the steps below'.
• Refer to the following for the recommended OS
versions for your PC:
- Windows 8, Windows 8.1, Windows 10
- OSX 10.7. 10.8, 10.9.10.10. 10.11.
macOS 10.12. 10.13. 10.14. 10.15
(2> Dow'nload and install the dedicated driver to the
PC. (Only fo r Windows OS)
Download and install the driver from the website
below.
https://panasonic.jpfsupport/globalfcs/audio/
(This site is in English only.)
© Dow'nload and install the dedicated app
“Panasonic Audio Player 2” (free o f charge) on
your PC. (For Windows OS and OS X)
Download and install the app from the website
below.
https://panasonic.jpfsupport/globalfcs/audio/
(This site is in English only.)
(as of M ay 2021)
Main u n it (rear)
USB-DAC p o rt
3
C onnect th e AC m ains lead to th e main u n it and
turn th is system on.
4
Press [RADIO, EXT-lN] repeatedly to s e le ct “ PC” .
5
Operate th e PC fo r playback.
Note:
• When you play back high-resolution audio, it is
recommended that you use a compatible USB 2.0 High
Speed Cable.
S ound effects
Changing the sound quality
1
Press [SOUND] repeatedly to select a sound effect.
2
Press
►] to s e le ct the desired se ttin g .
BASS
-4 to +4
TREBLE
SURROUND
“ON SURROUND” or
“OFF SURROUND”
■CD" ICD-DA)
“ON” o r “OFF” .
CD HIGH RES
RE-MASTER
12
By main u n it only
TUrn [BASS] o r [TREBLE] to a d ju s t the level.
