25
Step 5 :
Remove the Battery Pack.
Caution 1 : During assembling, ensure that the Battery
Holder (L) & Battery Holder (R) is properly fix into the Bat-
tery Pack.
Caution 2 : During assembling, dressed the 6P wire as Pic-
ture shown.
9.10. Disassembly of Main P.C.B.
• Refer to “Disassembly of Rear Cabinet Block”
• Refer to “Disassembly of Battery Pack”
Step 1 :
Detach 2P cable at connector (P1403) on the Main
P.C.B..
Step 2 :
Detach 11P FFC at connector (P1005) on the Main
P.C.B..
Step 3 :
Detach 16P FFC at connector (P1006) on the Main
P.C.B..
Step 4 :
Detach 2P cable at connector (P1501) on the Main
P.C.B..
Step 5 :
Detach 2P cable at connector (P1401) on the Main
P.C.B..
Step 6 :
Detach 2P cable at connector (P1402) on the Main
P.C.B..
Step 7 :
Detach 17P FFC at connector (P1801) on the Main
P.C.B..
Step 8 :
Detach 6P FFC at connector (P1811) on the Main
P.C.B..
Содержание SC-NA30GN
