14
6.2.
Service Mode
This mode can be used during servicing.
Here are the procedures to enter into service mode:
Step 1 :
Power-up the main unit.
Step 2 :
Press & hold [VOL+] button, [VOL-] button and [POWER] button on main unit.
This unit is equipped with service mode function for:
Step 1 :
Checking the region/model and generation no.
Step 2 :
Checking the Main micro-p & HDMI micro-p firmware version.
6.2.1.
Checking of Main Micro-p Firmware version
Here are the procedures to check the region/model, generation no. and main firmware version:
Step 1 :
Power-up the main unit.
Step 2 :
Enter into service mode. (Refer to Section 6.2 for the procedures).
Step 3 :
Press [VOL+] to check for the region/model & generation no. (Refer to table 6-2 for information on the LED indication).
Step 4 :
Press [VOL+] to check for the main micro-p firmware version no. (Refer to table 6-2 for information on the LED indication).
Table 6-2
6.2.1.1.
Generation Bit No.
The generation bit no. is used for indication of the Model Year. (Refer to table 6-3 for more information).
Table 6-3
6.2.1.2.
Model Bit No.
The model bit no. is to indicate the software for the specific model. (base on chip-select detection).
(Refer to table 6-4 for more information)
Table 6-4
6.2.1.3.
Region Bit No.
The region bit no. is to indicate the destination for model. (Refer to table 6-5 for more information).
Table 6-5
Key Operation
LED 1 (TV BD/DVD)
LED 2 (CLEAR-
MODE)
LED 3 (SOUND-
EFFECT)
LED 4 (DVS)
LED 5 (DD/DTS)
Press [VOL+] button on main
unit for one time
Generation Bit No.
(Refer to section
6.2.1.1)
Model Bit No. (Refer
to section 6.2.1.2)
Region Bit 1
(Refer to section
6.2.1.3)
Region bit 0 (Refer
to section 6.2.1.3)
X
Press [VOL+] button on main
unit for two times
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Generation Bit
Number
Model By Year
TV LED
X
0
2010
O
1
2011
Model Bit
Number
Model No.
BD/DVD LED
X
0
HTB500
O
1
HTB10/50
Region Bit 1
Region Bit 0
Main Software
CLEAR-MODE DIALOG
SOUND EFFECT
By Destination
X
X
0 : Japan
X
O
1 : US
O
X
2 : Europe/Asia
Содержание SC-HTB10P
