Panasonic SC-HTB10P, Руководство по обслуживанию, Страница: 10 / 115

10
4 Specifications
Q
GENERAL
Power consumption: 25 W
Power consumption in standby mode: Approx. 0.1 W
Power supply: AC 120 V, 60 Hz
Dimensions (W x H x D):
(Without wall mount bracket) 800 mm x 108 mm x 58 mm
(31 1/2” x 4 1/4” x 2 9/32”)
(With wall mount bracket) 800 mm x 108 mm x 80 mm
(31 1/2” x 4 1/4” x 3 5/32”)
Mass (Weight):
(Without wall mount bracket) Approx. 3.2 kg (7.1 lbs)
(With wall mount bracket) Approx. 3.3 kg (7.3 lbs)
Operating temperature range: 0°C to +40°C (+32°F to +104°F)
Operating humidity range: 20% to 80% RH (no condensation)
Q
AMPLIFIER SECTION
RMS Output Power
Front ch: 30 W per channel (4
Ω
), 1 kHz, 10% THD
Subwoofer ch: 30 W per channel (4
Ω
), 100 Hz, 10% THD
Total RMS Dolby Digital mode power: 120W
FTC Output Power
Front ch: 20 W per channel (4
Ω
), 120 Hz to 20 kHz, 1% THD
Subwoofer ch: 20 W per channel (4
Ω
), 40 Hz to 120 Hz, 1% THD
Total FTC Dolby Digital mode power: 80 W
Q
SPEAKER SECTION
FRONT SPEAKERS (BUILT-IN)
Type: 1 way 1 speaker system (Bass Reflex)
Full range: 6.5 cm (2 1/2”) Cone type x 2
SUBWOOFER (BUILT-IN)
Type: 1 way 1 speaker system (Bass Reflex)
Woofer: 8 cm (3 1/8”) Cone type x 2
Q
TERMINAL SECTION
HDMI This unit supports “HDAVI Control 5” function.
HDMI input
Input Connector: Type A (19 pin)
HDMI AV output
Output Connector: Type A (19 pin)
Digital Audio Input
Optical digital input: Optical terminal
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format: LPCM, Dolby Digital
Note:
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum analyzer.