Panasonic SC-HG1-C, Руководство пользователя, Страница: 47 / 128

CC-LINK Network Communication
WUME-SCHG1C-4 4-13
■
Page settings
Before using the product in CC-Link mode 1, be sure to configure the page settings.
The page settings set the controller assignments in the remote registers (RWr, RWw).
If the page settings are not set, controllers are not assigned to the remote registers (RWr, RWw)
and data such as controller judgment values cannot be exchanged.
When the power is turned on, the page settings are not set {RY[10] to [12] = (0,0,0), RX[10] to [12]
= (0,0,0)}.
RWr /
RWw
Memory map (remote register)
Not set Page 1 Page 2 Page 3
+00
The controller data area has not
been assigned. Configure the
page settings.
In command mode → Command response sensor / command request sensor
+01 In command mode → Command response code / command code
+02
Master unit
Data
Slave unit 7
Data
Slave unit 14
Data
+03
+04
Slave unit 1
Data
Slave unit 8
Data
Not used
+05
+06
Slave unit 2
Data
Slave unit 9
Data
+07
+08
Slave unit 3
Data
Slave unit 10
Data
+09
+0A
Slave unit 4
Data
Slave unit 11
Data
+0B
+0C
Slave unit 5
Data
Slave unit 12
Data
+0D
+0E
Slave unit 6
Data
Slave unit 13
Data
+0F
Page 3
RY[10] to [12]=(0,0,1)
RX[10] to [12]=(0,0,1)
Page 2
RY[10] to [12]=(0,1,0)
RX[10] to [12]=(0,1,0)
Page 1
RY[10] to [12]=(1,0,0)
RX[10] to [12]=(1,0,0)
Slave unit 14 Slave unit 13 Slave unit 12 Slave unit 1
1
Slave unit 10
Slave unit 9 Slave unit 8 Slave unit 7 Slave unit 6
Slave unit 5 Slave unit 4 Slave unit 3 Slave unit 2 Slave unit 1 Master unit
If multiple page settings are set, the request with the lowest bit number is given priority.
Example: If remote outputs page 2 and page 3 {RY[10] to [12] = (0,1,1)} are set, page 2 (RY[11])
is given priority.