Panasonic SC-HG1-C, Руководство пользователя, Страница: 36 / 128

CC-LINK Network Communication
WUME-SCHG1C-4 4-2
4-1 Overview of communication
4-1-1 Communication with master station
Data is exchanged between the communication unit and master station using link devices.
There are four types of link devices: “Remote input RX”, “Remote output RY”, “Remote register
RWr”, and “Remote register RWw”.
The link device values of each are periodically updated by cyclic transmission.
Communication unit functions and link device assignments can be checked using the memory
map.
By accessing a link device that supports memory map, the master station can use the functions
of a communication unit.
RX[00] to [7F]
(*1)
RY[00] to [7F]
(*1)
RWr[00] to [3F]
(*2)
RWw[00] to [3F]
(*2)
• Communication unit
information
→ Various statuses
• Controller information
→ Output
RX[00] to [7F] (*1)
Memory map
CC-Link master station This product Horizontally connected controllers
•
Controller information
→ Measured values
→ Set values
→ Error states
RWr[00] to [3F] (*2)
• Communication unit
control
→ Operation mode
switching
→ Command send
request
→ External input
RY[00] to [7F] (*1)
• Controller control
→ Command type set -
ting
→ Data (set values)
RWw[00] to [3F] (*2)
Communication unit control section
Con-
troller
commu-
nication
control
section
Com-
muni-
cation
Control
section
Controller
Cyclic transmission
Horizontal
connection
Connector
Set values
Judgment output
Error
information
Set values
*1: The bit range depends on the operation mode.
CC-Link mode 1: RX[00] to RX[7F], RY[00] to RY[7F]
CC-Link mode 2: RX[00] to RX[17F], RY[00] to RX[17F]
CC-Link mode 3: RX[00] to RX[1BF], RY[00] to RY[1BF]
*2: The word range depends on the operation mode.
CC-Link mode 1: RWr[00] to RWr[0F], RWw[00] to RWw[0F]
CC-Link mode 2: RWr[00] to RWr[3F], RWw[00] to RWw[3F]
CC-Link mode 3: RWr[00] to RWr[3F], RWw[00] to RWw[3F]