Panasonic SC-EN9, Руководство по эксплуатации, Страница: 3 / 12

3
RQT7695
• Insert so the poles (+ and –) match those in the remote control.
• Do not use rechargeable type batteries.
The remote control
3
2
1
4
(R6, AA, UM-3)
g
Batteries
Remote control signal sensor
g
Use
Placement
Place this unit in an area with more than 300
mm of vertical space.
The CD lid may become damaged if it cannot
open completely.
Placement of speakers
You can remove the speaker cover netting.
Left and right speakers are exactly the same.
Note
Note
• Keep your speakers at least 10 mm away
from the system for proper ventilation.
• These speakers do not have magnetic
shielding. Do not place them near
televisions, personal computers or other
devices easily influenced by magnetism.
• To avoid damage to the speakers, do not
touch the speaker cones if you have taken
the nets off.
Connections
Caution
• Use the speakers only with the
recommended system. Failure
to do so may lead to damage
to the amplifier and/or the
speakers, and may result in
the risk of fire. Consult a
qualified service person if
damage has occurred or if you
experience a sudden change
in performance.
• Do not attach these speakers
to walls or ceilings.
4 AC adaptor
Connect the AC adaptor only
after all other connections
have been made.
BE SURE TO READ THE CAUTION
FOR THE AC MAINS LEAD ON
PAGE 2 BEFORE CONNECTION.
Note
Note
If the unit is left unplugged for
longer than two weeks, all settings
will revert to the factory settings.
Do the settings again if this
occurs.
2 Speakers
Before connecting, twist and
pull off the speaker cord
ends.
R
L
1
2
Red
Red Black
Black
Copper (+)
Copper (+)
Silver (–)
Silver (–)
1 AM loop antenna
Stand the antenna up on its base.
AM ANT
13V DC IN
To household
mains socket
&#$#06
Adhesive tape
3 DAB “T” antenna
The cross bar of the T should be
kept firmly stretched.
Find a position with good reception.
There is a function on the unit to check
signal quality (
→
page 8).
For best reception
A DAB outdoor antenna is recommended (
→
page 10).
Be sure to fully
tighten the screw.
• Aim at the sensor, avoiding obstacles, at a maximum range of 7 m
directly in front of the unit.
• Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.