42
VQT3M52
HDMI Colour Mode
This setting is for selecting colour-space conversion of the
image signal when the unit is connected using an HDMI
cable.
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
≥
Audio will be output through the system’s speakers when
“Off” is selected.
[BTT362]
HDMI Standby Pass-Through
Even if this unit is in standby mode, a device connected
with this unit can output videos and sound to the TV.
Moreover, you can switch the HDMI input terminal by
pressing [EXT-IN] on the remote control.
≥
Sound will not be output from this unit’s speakers.
VIERA Link
Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
≥
Select “Off” when you do not want to use “HDAVI
Control”.
Deep Colour Output
This setting is for selecting whether to use Deep Colour
Output when a television that supports Deep Colour is
connected.
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
this function is connected.
Power Off Link
Select the desired power off link setting of this unit for
VIERA Link operation (
>
33). (This works depending on
the settings of the connected VIERA Link “HDAVI Control”
compatible equipment.)
Video/Audio
:
When the TV is turned off, this unit will turn off
automatically.
Video
:
When the TV is turned off, this unit will turn off except
during the following conditions:
j
CD or MP3 audio playback
j
iPod/iPhone mode
j
Radio mode
j
“AUX”, “ARC” or “D-IN” (DIGITAL IN) mode
(non-selected TV AUDIO setting for VIERA Link)
j
“D-IN” (DIGITAL IN) mode (non-selected CABLE/
SATELLITE AUDIO setting for VIERA Link)
TV Audio Input
Select the TV audio input to work with the VIERA Link
operations.
TV System
Change the setting to match the equipment you are connecting
with.
≥
When NTSC contents are played, they are outputted in the
signal format specified in the “NTSC Contents Output”,
irrespective of the settings here.
Network Easy Setting (
>
20)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
[BTT362]
LAN Connection Mode
Select connection method.
[BTT362]
Wireless Settings
This allows the Wireless router and connection settings to
be set and the current connection settings and connection
state to be checked when a wireless connection is used.
Connection Setting
The Wireless router connection wizard will be displayed.
Double Speed Mode Setting (2.4GHz)
When a 2.4 GHz wireless format is used, this setting
sets the connection speed.
≥
If you connect using the “Double Speed Mode
(40MHz)”, two channels use the same frequency band,
and there is consequently a greater risk of reception
interference. This can cause the connection speed to
drop or the connection to become unstable.
IP Address / DNS Settings
This is for checking the state of the network connection
and setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥
“Connection Speed Setting” is enabled only when
“Connection Speed Auto-Config” is turned “Off”.
Network
VQT3M52~Body_mst.fm 42 ページ ２０１１年１月２６日 水曜日 午前１０時１分
