http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0200000000x.html
2 Before Repair and Adjustment (Using Active
Subwoofer Unit)
Disconnect AC power, discharge Power Supply Capacitors C546 , C547, C548 & C549 (from active
subwoofer unit) through a 10
Ω
, 1W resistor to ground.
DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy
solid state devices.
After repairs are completed, restore power gradually using a variac, to avoid overcurrent.
Current consumption at AC 120V, 60Hz in NO SIGNAL mode should be ~1000 mA [From Active
Subwoofer].
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s0200000000x.html9/3/2004 9:42:52 AM