34
Step 4
Release 2 tabs.
Step 5
Release Rear Panel.
10.11. Disassembly of Main P.C.B.
•
Refer to “Disassembly of Top Cabinet”.
•
Refer to “Disassembly of Rear Panel”.
Step 1
Detach 13P Cable Wire at the connector (CON2) on
SMPS P.C.B..
Step 2
Detach 24P FFC at the connector (FP8201) on Main
P.C.B..
Step 3
Detach 10P FFC at the connector (CN8251) on Main
P.C.B..
Step 4
Remove 2 screws.
Step 5
Remove the Main P.C.B. from Bottom Chassis accord-
ing to arrow shown.
10.12. Disassembly of SMPS Module
and Voltage Selector P.C.B.
•
Refer to “Disassembly of Top Cabinet”.
•
Refer to “Disassembly of Rear Panel”.
Step 1
Detach 13P Cable Wire at the connector (CON2) on
SMPS Module.
Step 2
Remove 2 screws.
Step 3
Remove SMPS Module and Voltage Selector P.C.B..
Caution: During assembling, ensure that SMPS Module is
seated properly through the located & fully guided.
Содержание SA-AKX17PH
