Panasonic S24GPWR, Руководство по эксплуатации

Страница: 98 / 132

98
4.5.6. Loop Detection Configuration Menu
On the Advanced Switch Configuration Menu, pressing "D" opens the Loop Detec -
tion Configuration Menu screen as shown in Fig. 4-31. On this screen, you can con
-
figure the Loop detection and blocking function settings.
For network configuration, refer to Appendix D "Network Configuration Example
and Notes Using Loop Detection and Blocking Function" in Basic Operation Man
-
ual.
PN25249 Local Management System
Advanced Switch Configuration -> Loop Detection Configuration Menu
Global Loop Detection Status: Enabled
Port Trunk Link State Loop Detect Mode Recovery Recovery Time
---- ----- ---- ----------- ------------- -------- ---------- ---------------
1 --- Up Forwarding Enabled Block Enabled 60
2 --- Down Forwarding Enabled Block Enabled 60
3 --- Down Forwarding Enabled Block Enabled 60
4 --- Down Forwarding Enabled Block Enabled 60
5 --- Down Forwarding Enabled Block Enabled 60
6 --- Down Forwarding Enabled Block Enabled 60
7 --- Down Forwarding Enabled Block Enabled 60
8 --- Down Forwarding Enabled Block Enabled 60
9 --- Down Forwarding Enabled Block Enabled 60
10 --- Down Forwarding Enabled Block Enabled 60
11 --- Down Forwarding Enabled Block Enabled 60
12 --- Down Forwarding Enabled Block Enabled 60
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page Set Port [L]oop Detect Status
[P]revious Page Set Port Recovery [S]tatus
[E]nable/Disable Loop Detection Set Port Recovery [T]imer
Loop History [I]nformation [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-31 Loop Detection Configuration Menu
Screen Description
Global Loop Detec
-
tion Status
Displays the status of the Loop detection and blocking function.
Enabled The Loop detection and blocking function is enabled. (Fac -
tory default setting)
Disabled The Loop detection and blocking function is disabled.
Port Displays the port number.
Trunk Displays the link aggregation group ID.
Link Displays the link-up status.
Up Linking up.
Down Linking down.
State Displays the operation of the Loop detection and blocking function.
Forwarding Sending packets normally.
Loop Detect Detecting a loop and blocking a port.
Loop Detect Displays the status of the Loop detection and blocking function for each
port.
Enabled The Loop detection and blocking function is enabled.
(Factory default setting: Ports 1 to 22)
Disabled The Loop detection and blocking function is disabled.
(Factory default setting: Ports 23 to 24)