Preparation
8
Turning the power on/off
In the power-off state, press and hold [ ] of this unit
for approx. 3 seconds until the LED (blue) blinks.
• A beep will sound, and the LED (blue) will blink slowly.
∫
To turn the power off
Press and hold [
] for approximately 3 seconds. A beep will sound
and the power will be turned off.
Note
• The unit will beep and the power will be turned off automatically in the following cases. (Auto Power Off) (
– If the unit is not connected to a Bluetooth
®
device and is left without any operations for approximately 5 minutes.
– If the unit is connected to a Bluetooth
®
device and is silent for approximately 5 minutes.
How to wear the earphones
The left earphone has the raised dot as shown in the illustration.
• M-size earpieces are attached at the time of purchase. If they are not the right size, replace them with S or L-size
earpieces (supplied).
LED
[
]
Raised dot
