Recording Mode
-22-
ª
Finding the End of Recording
(Blank Search Function)
The Blank Search Function aids you in locating
the end of the recording on the Cassette quickly.
1
Set [TAPE RECORDING MENU] or
[TAPE PLAYBACK MENU] >> [INITIAL] >>
[BLANK SEARCH] >> [YES]
.
≥
The [BLANK] Indication appears during the
Blank Search.
≥
Approximately 1 second before the last
recorded scene, the Camcorder switches to
the Recording Pause Mode or the Still
Playback Mode.
≥
If there is no blank left on the Cassette, the
Camcorder stops at the end of the tape.
To Cancel Blank Search Before Completion
Press the [
∫
] Button.
ª
To Add a Sound while Recording
With the supplied Magic Wire Remote Control
with Narration Mic (optional) connected to the
[REMOTE] Jack
, you can add a narration
while recording is in progress.
While the [TALK] Button
]
Indication is displayed and the sound is recorded
from [MIC]
≥
While the [TALK] Button is pressed, the built-in
microphone does not operate.
Photoshot
Still pictures can be recorded from the Camcorder
lens.
1
Press the [PHOTO SHOT] Button
in the
Recording Pause Mode.
≥
The Camcorder records a still picture for
about 7 seconds and then switches back to
the Recording Pause Mode.
MENU
STILL
ENTER
FADE
i
s
REC
PHOTO SHOT
≥
If you set [SHTR EFFECT] on the [CAMERA]
Sub-Menu to [ON], you can add an image and a
sound like releasing the shutter.
ª
Progressive Photoshot
When the [
æ
] Indication is displayed,
Progressive Photoshot Function works.
You can record still pictures with higher quality by
using this function.
≥
The Progressive Photoshot Function may not
be activated depending on the function you use.
(
ª
Continuous Photoshot
If you set [SHTR EFFECT] on the [CAMERA]
Sub-Menu to [ON] and keep the [PHOTO SHOT]
Button pressed, the Camcorder will continuously
record still pictures in approximately 0.7 seconds
intervals until the button is released.
≥
The screen blinks and, at the same time, a
shutter clicking sound is recorded.
ª
Digital Still Picture
When the [STILL] Button
become still pictures. When the button is pressed
again, the Digital Still Picture Mode is cancelled.
≥
We recommend that you press the [STILL]
Button first at the position where you wish to
record the still picture so as to enter the Digital
Still Picture Mode and then press the
[PHOTO SHOT] Button.
≥
For other notes concerning this item, see
.
PHOTO
PHOTO
PHOTO
PHOTO
STILL
ENTER
FADE
i
s
PV-GS33Eng_text.fm 22 ページ 2004年2月27日 金曜日 午後4時39分
Содержание PV-GS33PP
Страница 67: ...67 PV GS33PP_Eng book 67...