Panasonic PV-500, Руководство пользователя

Страница: 39 / 494

37
B
asi
c O
p
er
at
io
n
C
h
ap
te
r
3
INDE
X
3.1.2 SETUP Menu and RUN Menu
About windows
PV500 has two windows; RUN menu for performing inspections and SETUP menu for making settings such as
inspection conditions.
When power is turned on, RUN menu is displayed. To make a configuration, switch to SETUP menu with
Ope/Set Switch of the keypad. As a default setting, switching to SETUP menu stops operation. You can change
the setting to operate in SETUP menu as well.
RUN menu
In RUN menu, you can change its layout (type, size and position of displayed windows). Also, you can choose
the colors of each area of display (common to SETUP menu).
1 Menu bar Displays the menu to set in RUN menu.
2 Information display area
a Information Displays the current type, display pattern and the status of the
PV500.
b READ END signal
status Displays the status of READ END (REND) signal.
ON: Green, OFF: Black
c Total judgement result Displays the result of judgement formula registered as Total
Judgement.
d I/O terminal status Displays the status of OUT 0 - 7.
ON: Green, OFF: Black
e Time Displays inspection time and cycle in ms unit.
(For details of each time, see page 313.)
3 Message area Displays the message to inform.
Example)
• The setting was updated.
• The voltage of the attached battery became lower.
4 Display type Displays "RUN MENU".
(Indicates the current window is RUN menu.)
5 Status Displays the status operating (RUN) or pausing (STOP).
6 Screen window This is a window to display an image. In addition, a data R/W window which shows data
can be displayed in the area.
7 Key guide Displays the operations of each key on the keypad.