Panasonic PV-500, Руководство пользователя

Страница: 347 / 494

345
C
h
ap
te
r 7
C
ha
ng
ing
C
o
n
figu
ra
tion
INDE
X
7.2 General Settings
The settings made in “General” are saved in PV500. You cannot backup the data into the storage space in
PV500 or a SD memory card.
As you press the CANCEL key to return to the upper menu hierarchy from “General”, the screen displays a
message to save the modified settings. Be sure to select “Yes” to save the data in PV when you modified the
settings.
7.2.1 Specifying Data to Read at Startup
Specify the data to read from the storage space in PV500 to execution memory at PV startup. You can also
save the data in a SD memory card, however, cannot read it at startup.
•
For more information about the execution memory and the storage space in PV500, refer to section of
What Is a Product Type? (page 55).
•
To specify a type No. and a layout No. to read at startup, select [ENVIRONMENT]. Refer to page 331
for details.
1.
Select "TOOL” > “General” from the menu bar.
2.
Select "Setup Setting".
3.
Enter an area No. where the setting data to read at startup is stored.
If there is no data in the specified area No., PV starts in the initial condition with no settings.
Start with Default Settings
Without loading the data in the area No., you can start PV500 with the default settings (execution memory
initialized).
1.
Press the F1 key and the F3 key on the keypad.
2.
Holding the keys pressed, turn on the power of PV500.
Until RUN menu appears, hold the keys pressed.