4
Format SD Card
Use one of the below methods to format an SD Card.
CAUTION: Formatting irretrievably deletes all the data on the SD Card, including
any protected content. Check the SD Card carefully to verify there are not any
files which should not be deleted before proceeding with formatting the SD Card.
4.1
Using SD Formatter Software
NOTE: The SD Formatter software can be downloaded from the Panasonic USA
support site.
1)
Insert an SD Card into the SD Card Slot built-in to the computer or into an SD Card
Reader/Writer attached to the computer.
NOTE: If the below screen appears after inserting the SD Card into the SD Card
Reader/Writer or SD Card Slot, left click on
CANCEL
.
2)
Click on
START
, mouse over
ALL PROGRAMS
, mouse over
PANASONIC
, mouse over
SDFORMATTER
, and then left click on
SDFORMATTER
.
3)
Select the drive designated as the SD Card Drive from the drop down list, and then left
click on
FORMAT
.
NOTE:
The version of
SD
Formatter
displayed in
ALL
PROGRAMS
will be
dependent upon the version
downloaded and installed.
LCX16 / LCX66 Series Projection LCD TV Tuner Firmware Installation Instructions
Page 5 of 11
