Chapter 2
Getting Started — Connecting
56 - ENGLISH
For <DVI-D IN 1>/<DVI-D IN 2> terminals and <DVI-D IN 3>/<DVI-D IN 4> terminals of the
Interface Board
This is an example when the optional Interface Board for DVI-D 2 input (Model No.: ET-MDNDV10) is installed in
<SLOT 2>.
DVD player with HDMI terminal (HDCP)
Note
f
Setting the [DISPLAY OPTION] menu
→
[SLOT IN] is required depending on the connected external device or the input signal.
Setting the [DISPLAY OPTION] menu
→
[SLOT IN]
→
[DVI-D LINK] is required when the dual link signal or the quad link signal is input.
f
The <DVI-D IN 1>/<DVI-D IN 2>/<DVI-D IN 3>/<DVI-D IN 4> terminals can be connected with the HDMI and DVI-D compatible device.
However, some external devices may not be able to project images properly, such as the image not displaying.
Connecting example: Computers
This is an example of installing the optional Interface Board for HDMI 2 input (Model No.: ET-MDNHM10) to
<SLOT 1>, and the optional Interface Board for DVI-D 2 input (Model No.: ET-MDNDV10) to <SLOT 2>.
Control computer
Computer
Computer
Control computer
Attention
f
When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially
available shielded cables.
Note
f
Setting the [DISPLAY OPTION] menu
→
[SLOT IN] is required depending on the connected external device or the input signal.