Panasonic PT-RQ32KU страница 170 Скачать руководство пользователя

Страница: 170 / 285

Chapter 4

Settings — [PROJECTOR SETUP] menu

170 - ENGLISH

[OFF]

Select this item when the contrast synchronization function is not used.

[ON]

Select this item when the contrast synchronization function is used.

Note

The contrast synchronization function will operate when all of the following conditions are fulfilled.

All the projectors to be linked are connected in a loop with the daisy chain connection. (Maximum 64 projectors)

[MODE] on only one projector that is linked is set to [MASTER], and [MODE] on all other projectors are set to [SLAVE].

[CONTRAST SYNC] on the projectors to perform the contrast synchronization is set to [ON].

It is possible to set [CONTRAST SYNC] to [OFF] for the projectors that are linked but not to synchronize.

Setting the shutter synchronization function

1) Press

to select [MULTI PROJECTOR SYNC].

2) Press the <ENTER> button.

The

[MULTI PROJECTOR SYNC]

screen is displayed.

3) Press

to select [MODE].

4) Press

to switch the item.

The items will switch each time you press the button.

[OFF]

Select this item when the contrast synchronization function and the shutter synchronization function

are not used.

[MASTER]

Select this item when the contrast synchronization function or the shutter synchronization function is

used.

Set this item only on one of the linked projectors that becomes the synchronization source of the

shutter operation.

[SLAVE]

Select this item when the contrast synchronization function or the shutter synchronization function is

used.

Set this item in all the linked projectors excluding the projector set as the [MASTER].

When anything other than [OFF] is selected, the diagnostic result is displayed in [LINK STATUS], indicating

if all the projectors including the projectors targeted for synchronization are correctly connected, and if

[MODE] is correctly set.

[LINKED]

All the projectors are correctly connected, and correctly set. They are in the condition that the contrast

synchronization function or the shutter synchronization function can be used.

[NO LINK]

The projectors are not correctly connected, or not correctly set. Check the cable connection status

and the projector setting for each projector that is linked.

5) Press

to select [SHUTTER SYNC].

6) Press

to switch the item.

The items will switch each time you press the button.

[OFF]

Select this item when the shutter synchronization function is not used.

[ON]

Select this item when the shutter synchronization function is used.

Note

The shutter synchronization function will operate when all of the following conditions are fulfilled.

All the projectors to be linked are connected in a loop with the daisy chain connection. (Maximum 64 projectors)

[MODE] on only one projector that is linked is set to [MASTER], and [MODE] on all other projectors are set to [SLAVE].

[SHUTTER SYNC] on the projectors to perform the shutter synchronization is set to [ON].

It is possible to set [SHUTTER SYNC] to [OFF] for the projectors that are linked but not to synchronize.

The shutter operation by the shutter synchronization function will follow the setting of the [DISPLAY OPTION] menu

→

[SHUTTER

SETTING] on the projector that [MODE] is set to [MASTER].

When the input signal to each linked projector is not synchronized, the timing of the shutter operation between the projectors may shift up to

1 frame while using the shutter synchronization function.

The shutter function of the projector with [MODE] set to [SLAVE] can be operated individually. At that time, the shutter operation will follow

the setting of the [DISPLAY OPTION] menu

→

[SHUTTER SETTING] set in that projector.

[RS-232C]

Set the communication conditions of the <SERIAL IN>/<SERIAL OUT> terminals. For details on the connection

method for RS-232C communication, refer to “<SERIAL IN>/<SERIAL OUT> terminal” (

page 245).

Содержание PT-RQ32KU






























































































































































































































































































Результаты поиска

Содержание PT-RQ32KU

Отзывы:

Похожие инструкции для PT-RQ32KU

Бренды по названию

Популярные бренды

Panasonic PT-RQ32KU, Руководство по эксплуатации

Результаты поиска

Содержание PT-RQ32KU

Отзывы:

Похожие инструкции для PT-RQ32KU

Бренды по названию

Популярные бренды