Chapter 4
Settings — [POSITION] menu
102 - ENGLISH
2) Press the <ENTER> button.
f
The
[ZOOM]
screen is displayed.
3) Press
as
to select [MODE].
4) Press
qw
to switch the item.
[INTERNAL]
Enlarges the size within the aspect range set with [SCREEN FORMAT].
[FULL]
Enlarges or reduces the size using the entire display area set with [SCREEN FORMAT].
5) Press
as
to select [INTERLOCKED].
6) Press
qw
to switch the item.
[OFF]
Sets the [VERTICAL] and [HORIZONTAL] zoom ratio.
[ON]
Uses [BOTH] to set zoom ratio. Image can be enlarged or reduced vertically and horizontally at the
same magnification.
7) Press
as
to select [VERTICAL] or [HORIZONTAL].
f
If [ON] is selected, select [BOTH].
8) Press
qw
to adjust.
Note
f
When [ASPECT] is not set to [DEFAULT], [MODE] is not displayed.
f
Zoom ratio less than 100 cannot be set when the video signal fulfilling one of the following conditions is being input.
g
Video signal with resolution exceeding 1 920 x 1 200 dots
g
Video signal with dot clock frequency exceeding 162 MHz
[GEOMETRY]
You can correct various types of distortion in a projected image.
Unique image processing technology enables projection of a square image on a special screen shape.
1) Press
as
to select [GEOMETRY].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Does not perform geometric adjustment.
[KEYSTONE]
Adjusts any trapezoidal distortion in the projected image.
[CORNER CORRECTION]
Adjusts any distortion in the four corners of the projected image.
[CURVED CORRECTION]
Adjusts any curved distortion in the projected image.
[PC-1]
*1
Performs geometric adjustment using a computer.
[PC-2]
*1
[PC-3]
*1
*1
Advanced skills are necessary to use a computer to control geometric adjustment. Consult your dealer. Up to three geometric adjustments
performed using the computer can be saved.
Setting [KEYSTONE] or [CURVED CORRECTION]
1) Press
as
to select [GEOMETRY].
2) Press
qw
to select [KEYSTONE] or [CURVED CORRECTION].
3) Press the <ENTER> button.
f
The
[GEOMETRY:KEYSTONE]
or
[GEOMETRY:CURVED CORRECTION]
screen is displayed.
4) Press
as
to select the item to adjust.
5) Press
qw
to adjust.
