Audio
42
- ENGLISH
Settings
Audio
Select [Audio] from the Main Menu (see “How
to operate menu” on page 33) and then select
the item from the Sub Menu.
PT-TW330
Mute
Temporarily turn off the sound.
Press ▲▼ to select [Mute].
1
)
Press ► to display the setting dialog
2
)
box.
Press ◄► to switch [On]/[Off].
3
)
On
Mute.
Off
Output audio.
Press
z
<MUTE> button on the remote control
can also turn on/off the sound.
Volume
Adjust the volume
.
Press ▲▼ to select [Volume].
1
)
Press ► to display the adjustment
2
)
dialog box.
Press ◄► to adjust the volume.
3
)
Operation
Adjustment
Adjustment
range
Press ►.
Turn up the volume
Maximum value 32
Press ◄.
Turn down the
volume
Minimum value 0
You can also press the </-> buttons
z
on the remote control or on the control panel.
In Standby Mode (Audio)
This function is used to switch the output audio signal
from the <VARIABLE AUDIO OUT> terminal On/Off at
standby mode.
Press ▲▼ to select [In Standby Mode
1
)
(Audio)].
Press ► to display the adjustment
2
)
dialog box.
Press ◄► to switch [On]/[Off].
3
)
On
Output the audio signal from the
<VARIABLE AUDIO OUT> terminal
when in Standby mode.
Off
Mute the audio signal from the
<VARIABLE AUDIO OUT> terminal
when in Standby mode.
Note
When setting the [In Standby Mode (Audio)] function to
z
[On] and in Standby mode status, the connected audio
signal to <AUDIO 1 IN> terminal can be output from the
<VARIABLE AUDIO OUT> terminal. The audio signal
output level is fixed and cannot be adjusted.