background image

Basic O

p

eration

Remote control operation

E

NGLISH - 27

When projecting an image, press 

FREEZE

 to 

capture the projected image and display it on 
the screen as a still picture. While the image is 
frozen, the sound will be stopped.

Press the 

FREEZE

 button to return to the projection.

You can turn off the lamp and stop the 
projection temporary for electrical power save. 

Press the 

SHUTTER

 button to return to the projection.

You can reset most of the customised settings 
to the factory defaults by pressing the 

DEFAULT

 button of the 

Remote control

Display the required sub menu or the menu 
items, and press the 

DEFAULT

 button again.

 

See “Main menu and Sub-menu” on page 30.

You can project an image in split 2 windows 
as an 

INDEX-WINDOW

, one is frozen, stored 

in memory and displayed on the screen’s left 
side, while the display of subsequent images 
continues on the right.
To escape from the 

INDEX-WINDOW

, press 

the 

MENU

 or 

RETURN

 button.

Q

Switching the position

In default, the frozen image is displayed on the left 
and the subsequent image is displayed on the 
right. Press 

I

 

H

 to switch the position.

Q

Changing the image size

Press 

F

 

G

 to switch and cycle through in 3 size.

Q

Capturing a new image

While in 

INDEX-WINDOW

 mode, press 

ENTER

 to 

capture a new image and the frozen image window 
will be updated in a while.

Capturing an image

Stopping the projection temporary

Resetting to the factory default settings

NOTE:

• Some menu items are not available to reset by pressing 

the 

DEFAULT

 button. Adjust each menu items 

manually.

• To reset all the settings to the factory defaults, see 

“INITIALIZE ALL” on page 38.

Projecting an image in INDEX-WINDOW mode

Projected image

Frozen image

Continuing image

Frozen image

Continuing image

Continuing image

Frozen image

NOTE:

• If you change the window size, the aspect ratio of the 

image is changed and becomes vertically elongated.

Frozen image

Continuing image

Содержание PT-FW100NTE

























































Отзывы: