80
4.5.11. LLDP Configuration
On the Basic Switch Configuration Menu, pressing "L" opens the LLDP Configura
-
tion screen, as shown in Fig. 4-31. On this screen, you can configure the LLDP set
-
tings.
PN28168 Local Management System
Basic Switch Configuration -> LLDP Configuration
LLDP Status : Disabled
Port Admin Status Port Desc Sys Name Sys Desc Sys Cap Mgmt Addr
---- ------------ --------- -------- -------- -------- ---------
1 Both Disabled Disabled Disabled Disabled Disabled
2 Both Disabled Disabled Disabled Disabled Disabled
3 Both Disabled Disabled Disabled Disabled Disabled
4 Both Disabled Disabled Disabled Disabled Disabled
5 Both Disabled Disabled Disabled Disabled Disabled
6 Both Disabled Disabled Disabled Disabled Disabled
7 Both Disabled Disabled Disabled Disabled Disabled
8 Both Disabled Disabled Disabled Disabled Disabled
9 Both Disabled Disabled Disabled Disabled Disabled
10 Both Disabled Disabled Disabled Disabled Disabled
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [S]et LLDP Status Enable/Disable TL[V]
[P]revious Page [L]LDP Port Admin Status N[e]ighbor Table
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-31 LLDP Configuration
Screen Description
LLDP Status
Displays the LLDP settings.
Enabled
Enables the LLDP.
Disabled
Disables the LLDP.(Factory default setting)
Port
Displays the port number.
Admin Status
Displays the LLDP status.
TX Only
Executes only LLDP transmission.
RX Only
Executes only LLDP receiving.
Both
Executes LLDP transmission and receiving. (Factory default set
-
ting)
Disabled
Does not execute LLDP transmission and receiving.
Port Desc
Displays whether or not interface information is included in the frame of the
LLDP.
Enabled
Included in the LLDP.
Disabled
Not included in the LLDP. (Factory default setting)
Sys Name
Displays whether or not the host name is included in the frame of the LLDP.
Enabled
Included in the LLDP.
Disabled
Not included in the LLDP. (Factory default setting)
