102
4.6.3.
Port Monitoring Configuration
On the Advanced Switch Configuration Menu, pressing "M" opens the Port Moni
-
toring Configuration Menu screen, as shown in Fig. 4-42. In this Switching Hub,
when analyzing communication using a protocol analyzer, etc., it is possible to
monitor other port's packet that cannot be obtained under normal conditions
because of being filtered. On this screen, you can configure the port monitoring
settings.
PN28168 Local Management System
Advanced Switch Configuration -> Port Monitoring Configuration Menu
Monitoring Port Be Monitored Port(s)
--------------- -----------------------------------------------------------
1 2
Direction Status
--------- -------------
Both Disabled
-------------------------------- <COMMAND> -----------------------------------
[S]et Monitoring Port
Set Ports to be [M]onitored
Set Traffic [D]irection
[C]hange Mirror Status
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-42 Port Monitoring Configuration
Screen Description
Monitoring Port
Displays the destination port number of data for which port monitoring has
been executed.
Be Monitored Port(s)
Displays the port number(s) that are targets of port monitoring.
Direction
Displays the communication direction of the target packet for port monitor
-
ing.
Tx
Monitors the transmit packet.
Rx
Monitors the receive packet.
Both
Monitors both of the transmit and receive packets. (Fac
-
tory default setting)
Status
Displays the monitoring status.
Enabled
Port monitoring is enabled.
Disabled
Port monitoring is disabled. (Factory default setting)
