Panasonic PN28080i-ID, Руководство по эксплуатации

Страница: 34 / 94

34
3.1.12. System Security
Select "Basic Config" and System Security" and then "System Security" to open the
screen shown in Figure 3-12. On this screen, you can configure the various settings
for accessing this switch for configuration and management.
Figure 3-12 System Security
Screen Description
Console Displays the idle timeout settings (in minutes) for terminating a console-con
-
nected session if no input is made. The factory default setting is 5 minutes.
Telnet Displays the idle timeout settings (in minutes) for terminating a Telnet-con
-
nected session if no input is made. The factory default setting is 5 minutes.
SSH UI Idle Displays the timeout settings (in seconds) terminating a SSH-connected session
if no input is made. The factory default setting is 5 minutes.
Idle Displays the time to want for response to SSH authentication.
The factory default setting is 120 seconds.
Retries Time Displays the number of times of retransmission of SSH authentication.
The factory default setting is 5.
SNMP Agent Sta
-
tus
Displays the SNMP access settings. "Disabled" is the factory default setting.
Enable
Access is enabled.
Disable Access is disabled.
Telnet Server Sta
-
tus
Displays the Telnet access settings. "Enable" is the factory default setting.
Enable
Access is enabled.
Disable Access is disabled.
Web Server Status Displays the Web access settings. "Disable" is the factory default setting.
Enable Access is enabled.
Disable Access is disabled.