Panasonic PN28080i-ID страница 3 Скачать руководство пользователя

Страница: 3 / 94

This chapter contains important safety instructions for preventing bodily injury
and/or property damage. You are required to follow them.

■Severity of bodily injury and/or property damage, which could result from incor

rect use of the switch, are explained below.

■The following symbols are used to classify and describe the type of instructions to

be observed.

Important Safety Instructions

This symbol indicates safety instructions.Deviation from these instruc

tions could lead to bodily injury and/or property damage.

This symbol is used to alert users
to what they must not do.

This symbol is used to alert users
to what they must do.

PRO

HIB

ITED

● Do not use power supply other than AC 100 - 240V.

Deviation could lead to fire, electric shock, and/or equipment failure.

● Do not handle the power cord with wet hand.

Deviation could lead to electric shock and/or equipment failure.

● Do not handle this Switching Hub and connection cables during a thun

derstorm.
Deviation could lead to electric shock.

● Do not disassemble and/or modify this Switching Hub.

Deviation could lead to fire, electric shock, and/or equipment failure.

● Do not damage the power cord. Do not bend too tightly, stretch, twist,

bundle with other cord, pinch, put under a heavy object, and/or heat it.
Damaged power cord could lead to fire, short, and/or electric shock.

● Do not put foreign objects (such as metal and combustible) into the

opening (such as twisted pair port, console port, SFP extension
slot) ,and/or do not drop them into the inside of the Switching Hub.
Deviation could lead to fire, electric shock, and/or equipment failure.

Please Follow the Instructions

ヤモヶヵリヰワ

Содержание PN28080i-ID































































































Результаты поиска

Содержание PN28080i-ID

Отзывы:

Похожие инструкции для PN28080i-ID

Бренды по названию

Популярные бренды

Panasonic PN28080i-ID, Руководство по эксплуатации

Результаты поиска

Содержание PN28080i-ID

Отзывы:

Похожие инструкции для PN28080i-ID

Бренды по названию

Популярные бренды