1
Instructions for the Electrical Installer
(PAW-PACR3)
For your safety
Read the following instructions carefully, and carry out secure installation and electrical work.
The precautions given in this manual consist of specific “Warnings” and “Cautions”. They provide important safety-related information. Be sure to
strictly observe all safety procedures. The labels and their meanings are as described below.
This symbol refers to a hazard or unsafe procedure or practice that can result in personal injury or product or
property damage.
This symbol refers to a hazard or unsafe procedure or practice that can result in severe personal injury or death.
* After installation is completed, perform a test run to check for operating trouble. Explain operating procedures to the customer following the
central control device Operation Manual and then request the customer to store this Instructions for the Electrical Installer together with the
central control device Operation Manual.
1
Material
The package includes following items:
• Controller box (Fig. 1-1)
• External power supply for DC 24V (Fig. 1-2)
• 2 pieces cable bushings M20 (Fig. 1-2)
• 3 pieces PAW-T10* (PCB + wire) (Fig. 1-3)
* It is necessary 1 piece for each indoor unit or group of
indoor units.
Required Installation material (field supplied):
• Control wire min. 5 x 0,5 mm² (similar IEC 60227-5)
• Single wire LiY type 1 x 0,5 mm²
• 4 screws diameter 5 mm and wall plugs
• Set of standard electric installation tools
Fig. 1-1
Fig. 1-2
Fig. 1-3
