Panasonic Panafax UF-895 страница 160 Скачать руководство пользователя

Страница: 160 / 194

158

403

No polling capability at the remote side.

Ask remote side to set "POLLED=ON".

404/405 During initial handshake, communication error

occurred.

Reload the document and send again.

406

Transmission Password does not match.
Receiving Password does not match.
Received from an unauthorized station in Selective
Reception mode.

Check the password or the telephone number
in One-Touch or Abbreviated station.

113
115
116

407

No confirmation from the receiving station for the
previous page sent.

Wait a few minutes and send again.

408/409 Remote side confirmation of previous page is illegible. Wait a few minutes and send again.

410

Communication aborted by the transmitting side.

Check with the other party.

411

Polling password does not match.

Check the polling password.

412

No data from the transmitting side.

Check with the other party.

414

Polling password does not match.

Check the polling password.

415

Polling transmission error.

Check the polling password.

416/417
418/419

Received data has too many errors.

Check with the other party.

420/421 Machine goes to receiving mode, but receives no

command from the transmitting side.

1. Remote side misdial.
2. Check with the other party.

422/427 Interface is incompatible.

Check with the other party.

430/434 Communication error occurred while receiving.

Check with the other party.

436/490 Received data has too many errors.

Check with the other party.

456

• Unit received a confidential document or was

requested to be polled of a confidential
document under any of following conditions.

1) Not enough space in memory to receive the

confidential document.

2) Confidential Mailbox is full.
3) While printing received document.

• Unit was requested to relay a document.

1. Print a File List and check the contents.
2. Wait until unit finishes printing.

492/493

494

Communication error occurred while receiving.

Check with the other party.

495

Telephone line disconnected.

Check with the other party.

501/502 Communication error occurred using the internal V.34

Modem.

Check with the other party.

Info.

Code

Meaning

Action

Page

Troubleshooting

Содержание Panafax UF-895



































































































































































































Результаты поиска

Содержание Panafax UF-895

Отзывы:

Похожие инструкции для Panafax UF-895

Бренды по названию

Популярные бренды

Panasonic Panafax UF-895, Руководство пользователя

Результаты поиска

Содержание Panafax UF-895

Отзывы:

Похожие инструкции для Panafax UF-895

Бренды по названию

Популярные бренды