114
Setting Your Machine
Fax Parameters
154
ROUTING HEADER
FORMAT
*1
Originator
Selecting the type of email header to be included in the
"From" field of each routed faxes.
Originator
:The originating fax machine’s TSI will
appear in the "From" field of the
routed email.
Relay Station
:The routing station’s email address
will appear in the "From" field of the
routed email.
2
Relay Station
155
PRINT ROUTED
DOCUMENT
*1
Inc. Only
Selecting whether a received fax to be routed is always
printed or only when the routing operation fails.
2
Always
156
PRINT FORWARDED
DOCUMENT
*1
Inc. Only
Selecting whether a memory received fax or email to
be forwarded is always printed or only when
forwarding is incomplete.
2
Always
157
TRANSACTION
JOURNAL
*1
Invalid
Selecting whether the machine sends a transaction
journal to the pre-programmed email address.
2
Valid
158
PC REMOTE UPDATE
*1
Invalid
Selecting whether the machine will accept commands
from an email application, to:
(a) Program the Internet Parameters
(b) Program the Auto Dialer
(c) Allow retrieval of the Journal
2
Valid
159
SUBJECT LINE ENTRY
*1
Invalid
Selecting whether the "Subject" line can be
programmed during each transmission.
2
Valid
160
DEFAULT DOMAIN
1
Invalid
Selecting whether the machine accepts to insert the
Default Domain when entering Manual Number
Dialing.
*2
Valid
161
DNS SERVER
1
Invalid
Selecting whether to use the DNS Server for the
Internet communication.
*2
Valid
162
TIFF VIEWER URL
1
None
Selecting whether to include the URL address in the
email message body.
*2
English
3
Japanese
163
ROUTING HEADER
*1
Invalid
Selecting whether to add the Header Print information
of the Routing Station on the top edge of each routed
pages.
2
Valid
164
IFAX XMT HEADER
(Email only)
*1
Included
Selecting whether to include the header when sending
a document to an addressee in the same Domain as
specified in the Default Domain parameter. (This is
useful when using the machine to scan documents
back to your PC)
Note:
When sending to a Domain other than as
specified in the Default Domain parameter, the
header will be included regardless of the
selection.
2
Not included
168
CC/BCC STATION
*1
Invalid
Selecting whether to allow the CC/BCC email
address(es) to be entered.
2
Valid
169
DHCP CLIENT
1
Invalid
Select whether the machine would automatically
acquire the Network Parameters from the DHCP
Server. (Such as IP Address, Subnet Mask, Default
Gateway IP Address,etc.)
Note:
If you change the setting of this parameter, the
machine will reboot automatically.
*2
Valid
No.
Parameter
Setting
Number
Setting
Comments
