Customizing Your Machine
34
Fax Parameter Table
22
SUBSTITUTE RCV
1
Invalid
Selecting whether the machine receives to memory when
the recording paper runs out, toner runs out or the
recording paper is jammed.
*2
Valid
23
REC. PAPER SIZE
1
A4
Setting the recording paper size installed in your machine.
*2
Letter
3
Legal
24
PRINT REDUCTION
1
Fixed
Selecting print reduction mode.
Fixed
:Reduce received document according to setting of
Parameter No. 25.
Auto
: Reduce received document according to the length
of received documents.
*2
Auto
25
REDUCTION RATIO
70
70%
Selecting the fixed print reduction ratio from 70% to 100%.
This parameter functions only when the fixed print
reduction is selected on Fax Parameter No. 24.
----
----
100
100%
26
POLLING PWD
(----)
Setting a 4-digit password for secured polling. (See page
66)
32
COPY REDUCTION
1
Manual
Selecting whether the machine performs the copy
reduction ratio automatically or manually.
Manual
: The machine will prompt you for the Zoom ratio
(100% to 70%) when making copies.
Auto
: The machine will automatically determine the
reduction ratio according to the length of the
original document.
*2
Auto
34
ENERGY SAVER
1
Off
To reduce the power consumption in standby, select either
Energy-Saver or Sleep mode and specify the Delay Time
(1 to 120 minutes) for the machine to enter into the
selected mode.
The Delay Timer setting is only available in the Energy-
Saver or Sleep Modes.
Off
: The unit will remain in standby
mode and consume more energy
than when in Energy-Saver or
Sleep modes.
Energy-Saver Mode
: Saves energy by consuming less
power than when in standby mode
by turning off the fuser unit after the
specified time.
Sleep Mode
: This is the lowest power state that
the machine enters after the
specified time without actually
turning off.
2
Energy-
Saver
*3
Sleep
35
DAYLIGHT TIME
1
Invalid
Selecting whether the clock adjusts for Daylight Saving
Time automatically. The built-in clock will advance 1 hour
at 2:00 am on the first Sunday in April and fallback 1 hour
at 2:00 am on the last Sunday in October.
*2
Valid
36
RING PTN (DRD)
(See Note 2)
*1
Invalid
All ring patterns.
2
Valid
Select a ring pattern for automatic answering.
1
: A Standard ring pattern.
2
: B Double ring pattern.
3
: C Triple ring pattern (Short-Short-Long).
4
: D All other triple ring patterns, except the
type C described above.
No.
Parameter
Setting
Number
Setting
Comments