Panasonic PAN1780, Руководство по интеграции

Страница: 17 / 44


PAN1780 Bluetooth Module 4 Reference Design
Module Integration Guide Rev. 1.1 Page 17 of 44
Jumper Layout Description
JP3 Module reset connected
Module reset disconnected
JP4 SWD connected Access to module and
programmer SWD.
SWD disconnected
JP8 Module UART connected Access to module UART Rx
and Tx.
Module UART disconnected
JP9 Module V
CC
connected Module V
CC
connection and
GND pin. The module V
CC
jumper can be removed for
current measurements.
JP7, JP10 FTDI connected to module
UART Option for module UART to
breakout pin or FTDI. Place
jumpers either just on JP7 or
JP7 and JP10.
Breakout pins of JP2
connected to module UART
JP11 3.3 V are supplied to the
breakout pin Option to power an external
sensor board with 3.3 V.
3.3 V are not supplied to the
breakout pin
JP12 Module V
CC
connected Option to break 3.3 V supply
via JP9 and connect 5 V
supply to pin 1 of JP12 to
power the module.
Module V
CC
not connected
JP13 1, 3: GND
2, 4: NFC Antenna
Option to connect NFC
antenna to PAN1780 module.