– 74 –
Chapter 4 Adjustments and Settings for Recording — Viewfinder status display
21 Zoom position display
Displays the zoom position with [Z00] (maximum wide-angle) - [Z99] (maximum zoom).
f
When connecting the lens that supports auto focus, the unit can be switched to [mm/m] at the [ZOOM/FOCUS] item on the setting menu [DISPLAY
SETUP] screen.
f
The focus position display does not move linearly. [NUMBER] is displayed as the factory setting.
22
Focus control information
Displays the focus control information with [99] to [00]. [AF] is displayed when auto focus is set with the auto-focus compatible lens connected, and
[MF] is displayed when manual focus is set. When auto-focus incompatible lens is connected, the focus control information is not displayed.
When connecting the lens that supports auto focus, the unit can be changed at the [ZOOM/FOCUS] item on the setting menu [DISPLAY SETUP]
screen.
23
Low-light display
The [SHOOTING MODE] item on the setting menu [SYSTEM SETUP] screen is set to [LOW LIGHT].
24
ND filter display
f
The currently selected ND filter is displayed.
f
When ND-- is displayed, the <ND FILTER> dial is out of position (i.e. not within <1> to <4>), so check the position of the <ND FILTER> dial.
25 Gain display
Displays the gain value of the image amplifier configured.
26 <WHITE BAL> switch position display
Displays the currently selected position. Also, white balance operation is displayed when the automatic white balance is preset. In auto tracking white
balance function mode, [ATW] is displayed, and when the auto tracking white balance function is locked, [LOCK] is displayed.
If the preset is set to [VAR], the set color temperature such as [V3.2K] is displayed.
27
Ach/Bch color temperature display
Sets the <WHITE BAL> switch to either <A> or <B>, and displays the color temperature when white balance is automatically adjusted.
28 Flash band compensation (FBC) function display
Displayed when the flash band compensation function is activated.
29 Digital zoom factor display
Displays digital zoom factor.
[DZx2]
2 times
[DZx4]
4 times
30 Scene file name display
The [SCENE FILE] (F1 to F6) scene file name is displayed.
31 Chromatic aberration compensation function (CAC)
Displayed when the chromatic aberration compensation function is active. (Only when the mode check is performed)
32
Battery charge level display
This changes [
5
]
→
[
4
]
→
[
3
]
→
[
2
]
→
[
1
] as the battery charge level gets lower.
When there is no more battery charge left, [
2
] ([
1
]) flashes.
(When the AC adaptor is used, other than [
5
] may be displayed, but this is not a problem.)
r
Batteries that support the battery charge level % (percentage) display
The battery charge level is displayed as follows:
[B
**
%]
10% - 99%
Displays the battery charge level as %.
[MAX]
Displays in a fully charged state.
[EMP]
Displays when the charge level is less than 10%.
r
Batteries that do not support the battery charge level % (percentage) display
The battery voltage is displayed.
[13.5V]
Displays the current voltage value.
33
One-clip recording mode status display
[1-CLIP]
A new clip is about to be recorded by one-clip recording.
[1
"
CLIP]
A new clip can be combined with the previous clip and recorded by one-clip recording.
34
Media free space display
f
When the [P2CARD REMAIN] item on the setting menu [DISPLAY SETUP] screen is set to [ONE-CARD], the slot number is displayed to the left of
the remaining space of the current P2 card for recording. When [TOTAL] is set, the total remaining space of the two cards is displayed.
f
The [ONE-CARD] and [TOTAL] display is swapped in the mode check.
f
Nothing is displayed while free space is being calculated and in the USB device mode. [LOOP] is displayed during loop recording.
f
In the mode check during loop recording, the standard recording time that is possible by loop recording is displayed.
f
Free space is displayed in 1-minute units in the range 0 to 999 minutes. 999 minutes is displayed for remaining space exceeding 999 minutes.
f
The display flashes when the remaining space falls to two minutes or below.
35 Media information display
Displays the card slot in which the P2 card is inserted and basic information.
[ ] illuminated
Recordable P2 card
[ ] illuminated green
P2 card for recording target
