– 133 –
Chapter 7 Menu Operations — Menu list
[DIAGNOSTIC] screen
Item
Description of settings
Remark
VERSION
Displays the version of all firmware in the camera.
The version of each firmware can be checked by opening a sub-screen.
(Sub-screen)
[CAM SOFT]
Camera microcomputer software
[SYSCON
SOFT]
System control microcomputer software
[P2CS BL2-1]
P2 control microcomputer boot program 1
[P2CS BL2-2]
P2 control microcomputer boot program 2
[P2CS KR]
P2 control microcomputer kernel
[P2CS AP]
P2 control microcomputer application software
[VUP]
System software for updating all firmware of the camera
[VUP FS]
File system for updating the camera
[CAM FPGA]
Camera FPGA configuration ROM
[BE FPGA]
BE FPGA configuration ROM
[PROXY SOFT]
Proxy board software version display (OP1)
[PROXY FPGA]
Proxy board FPGA configuration ROM (OP1)
[SDI IN FPGA]
FPGA configuration ROM of the SDI signal input board (OP2)
OPTION STATUS
Indicates whether there is an optional board, and displays activated status of the
upgrade software key. The following items are displayed on the sub-screen.
[SDI IN
BOARD]
--- (with board: [ACTIVE], without board: ---)
[PROXY
BOARD]
--- (with board: [ACTIVE], without board: ---)
[PRODUCTION
PACK]
Activate: [ACTIVE]
No: [----]
[NETWORK
FUNC.]
Activate: [ACTIVE]
No: [----]
[UPLINK
DEVICE]
Activate: [ACTIVE]
No: [----]
[PLAYLIST]
Activate: [ACTIVE]
No: [----]
MODEL NAME
Displays the product name of the camera.
SERIAL NO.
Displays the serial number of the camera.
OPERATION
Displays the operation time of the camera.
