18. Installation of EVF Spring, EVF F.P.C.
1) Insert the EVF F.P.C. into the EVF Spring hole paying
particular attention to the direction.
2) Connect the EVF F.P.C. to Connector FP951 or FP901
(For models with B/W EVF).
3) Insert the Locking Tab (L-2) at first, then fit the EVF
Spring in the EVF Case and tighten the Screw (450).
EVF Spring
EVF Case
Fit
(L-2)
hole
EVF F.P.C.
FP951
FP951 (For models with Color EVF)
FP901 (For models with B/W EVF)
Fig. D18
19. Removal of Eye Cap
Remove the Eye Cap after removing the 2 Screws (524).
20. Handling cautions of EVF Lens Unit
Use extreme care when handling the EVF Lens Unit to
avoid damage, dust, and spots (especially fingerprints,
etc.)
Installation of EVF Lens Unit, Eye Sight Lever
1) Install the Eye Sight Lever into the EVF Case hole in the
direction shown.
2) Install the EVF Lens Unit into the EVF Case.
3) After installing, confirm the Eye Sight Lever and the
EVF Lens Unit work together correctly.
EVF Lens Unit
Eye Sight Lever
hole
EVF Case
bosses
bosses
Fig. D19
Содержание NV-GS24EG
