background image

Auto Ice Off and Auto Ice Clean (For CW530J models)

When the refrigerator is in operation, the Auto Ice making mode will automatically operate 

without any setting. When setting the Auto Ice Off and Auto Ice Clean mode, the refrigerator 

will stop the Auto Ice making and clean the ice maker automatically.

 

„

How to operate the Auto Ice Off mode 

Light is on:  Auto Ice Off is operated.

Light is off:  Auto Ice Off is not operated.

 

●Press the “Auto Ice Off” icon twice in a row to stop Auto Ice 

making. Then, the LED icon of Auto Ice Off mode will turn 

on.

 

When you want to restart the Auto Ice making mode, press 

the “Auto Ice Off” once. Then, the LED icon of the Auto Ice 

Off mode will turn off.

Remark

 

 

● When the Auto Ice Off mode is on, Quick Ice Making, if active, will be stopped.

 

„

How to operate the Auto Ice Clean mode

 

Press and hold the “

Auto Ice Off

” icon for 3 seconds to 

enable/disable the Auto Ice Clean mode. At the end of the 

automatically cleaning process, the refrigerator will have a 

notification sound.

Remark

 

 

Cannot stop/disable the operation of Auto Ice Clean mode when it is in progress.

For details on the cleaning operation of Auto Ice maker, please refer to Page 39.

Quick Ice Making (For CW530J models)

When setting Quick Ice Making, the refrigerator will increase its capacity to reduce ice making 

time.

 

„

How to operate Quick Ice Making

Light is on:  Quick Ice Making is operated.

Light is off:  Quick Ice Making is not operated.

 

Press the “Quick Ice Making” icon twice in a row to start 

Quick Ice Making. Then, the icon of Quick Ice Making will 

turn on.

 

When you want to stop Quick Ice Making, press the 

“Quick Ice Making”

 icon once until the light turns off.

Remark

 

 

● The flashing of light LED [Quick Ice Making] means that the defrosting system is currently 

working. The “Quick Ice Making” mode will start right after the defrosting operation is 

finished.

 

The following modes will be stopped when Quick Ice Making is turned on:

•  Quick Freezing

•  Prime Fresh+

•  Prime Freeze

• 

Auto Ice Off

Light is on:   Auto Ice Clean  

is operated.

Light is off:   Auto Ice Clean 

 

is not operated.

32

Содержание NR-CW530H

























































Отзывы: