Panasonic NR-CW530H страница 29 Скачать руководство пользователя

Страница: 29 / 56

Prime Freeze

Prime Freeze is a separate room located inside the Freezer compartment. This compartment

is equipped with an individual fan system and high-class aluminum heat transfer plate, and

modes to adjust the cooling time according to each food processing purpose in order to

support the user in preparing dishes in a variety of way and save time.

How to operate Prime Freeze

Press the icon of the Prime Freeze compartment on the Operation Panel. Then, the LED

indicates position of the compartment, the LED indicates mode 1-2-3(*) and the LED

indicates operating time(**) of the Prime Freeze will turn on when selected.

Icon

Compartment

LED indicates

position of the

compartment

LED indicates

mode 1-2-3

LED indicates

operating time

Prime Freeze

(*) For LED indicates mode 1-2-3:

• If the previous setting has not run out of time, the light will display the previous setting

mode.

•

If there is no time left from the previous setting, all LED indicates mode 1-2-3 will turn off.

(**) For LED indicates operating time:

• If the previous setting has not run out of time, the remaining minute value will be

displayed.

• If there is no time left from the previous setting, the minute value will be displayed as “--”.

Continue to press the icon of the Prime Freeze compartment, then the LED indicates

position will ﬂash. After this step, if the previous setting have not run out of time, the

minute value will be cleared and displayed back to “--”. Press the icon of the Prime Freeze

until the desired mode is selected. Each time the button is pressed, the LED indicates

operating time will show the time in each respective mode.

Complete the setting

After completing the setting of Prime Freeze, press another button to finish and save the

settings that you have just made. Or if no other button is pressed within 10 seconds, the

Operation Panel will save the setting and return to stand by mode.

End mode

After the setting time of a mode running out, the Operation Panel will display the time back

to “0” and there will be a notification sound. The notification sound will repeat every

2 minutes for 6 minutes, until you press the “Prime Freeze” icon on the Operation Panel

or when the Freezer compartment door is opened. If you do not take food out immediately

after the end of the mode, your food may be frozen more than desired.

Содержание NR-CW530H

























































Результаты поиска

Содержание NR-CW530H

Отзывы:

Похожие инструкции для NR-CW530H

Бренды по названию

Популярные бренды

Panasonic NR-CW530H, Руководство по эксплуатации

Результаты поиска

Содержание NR-CW530H

Отзывы:

Похожие инструкции для NR-CW530H

Бренды по названию

Популярные бренды