- Eng-51 -
English
Cleaning Programs
Select F1 (Drain
Water) by tapping
.
Tap Auto Menu
key once.
F1. Drain Water
Water is pumped through the system to clean the pipes. The water is drained into the drip tray.
Touch Start/Set.
Empty the
drip tray after the program
has finished.
Add 100 ml of
water
to the water
tank. Ensure drip
tray is empty.
Note
1. Only run this program with 100
g
of water in the tank.
2. Do not remove the drip tray during the drain water program.
3. Empty the drip tray and rinse with running water after the program has finished.
Caution!
If the Drain Water program is used directly after a steam cooking program, hot water may be drained
into the drip tray.
F2. System Cleaning
The first stage of this program cleans the system with a citric acid solution. The second stage runs
water through the system to rinse the pipes.
Select F2 (System
Cleaning) by tapping
.
Tap Auto Menu
key once.
Make a solution of 20
g
citric
acid and 250 ml of water, add
the solution to the water tank.
Ensure drip tray is empty.
After the program has
paused, fill the water tank
with water (to max level).
Touch Start/Set.
The program will
run for 29 minutes.
Touch Start/Set.
The program will run
for approx. 1 minute. Empty the drip tray
after the program has finished.
Note
1. When
is displayed, run the ‘system cleaning’ program.
2. If the system cleaning program is not used regularly, the pipe will get blocked and the steaming
performance will be less effective.
3. Do not remove the drip tray during the drain program.
4. Empty the drip tray and rinse with running water after the program has finished.