– 22 –
d. programming Memory pads for 2 to 5 stage heating
1. Complete Steps 1–6 above.
2. Select Power Level for the second stage by touching Power Level Selector Pad.
The selected Power Level will be displayed in the window and the second stage
heating indicator “2” will start to blink.
[Example]: Touch Power Level Selector Pad once for HIGH power.
3. Set the desired heating time by touching appropriate Number Pads.
Note:
The maximum set time for “DEFROST” and “P0” is 30 minutes, and
15 minutes for all others.
However, the TOTAL TIME can be set up to 25 minutes, and 15 minutes
for continuous heating (1 to 5 stage heating) that excludes “DEFROST”
and “P0”.
[Example]: Touch Number Pads “2”, “0” and “0” for 2 minutes.
4. Touch Prog Pad again and the “PROG” sign and the second stage heating
indicator “2” will stop blinking. The total time for both stages will be displayed.
This means that you have completed programming the desired Memory Pad for
the second stage heating.
5. 3 seconds after programming is completed, “0” will appear.
6. Program the remaining pads as desired by repeating the Steps above.
Note:
When you want to program B or C side, touch Shift (A/B/C) Pad before
touching Program Number Pad.
Repeat the above procedure to set Heating for the third stage and later
stages.
E. Memory pad heating
1. Make sure the oven is plugged into a properly earthed electrical outlet.
2. Open the door.
The oven lamp will turn on. “0” will appear in the Digital Display Window.
Note:
While “0” will appear, operation is available. 1 minute after the door is
closed, “0” will disappear.
3. Put the food into a suitable container, place it in the centre of the oven and then
close the door securely.
The oven lamp will turn off.
4. Touch the desired Memory Pad.
A. The currently programmed information will be indicated.
[Example]: Memory Pad “5” (Program No. A-5)
The heating program (at DEFROST power for 1 minute, at HIGH
power for 2 minutes) as programmed on pages 21–22 is set.
5. Touch Start Pad.
A. The oven lamp will turn on.
B. During operation, the indicator appears in order from the left.
C. The heating time will count down.
(Continued on next page.)
how to Operate NE-1853
