6. Drive/Shutter/Image Stabiliser
132
Takes pictures continuously while the shutter button is pressed and held.
You can choose a burst setting which enables burst recording in high
image quality, [H], [M] or [L], or one which enables high-speed burst
recording, [
] (6K/4K photo), to suit the recording conditions.
1
Set the drive mode dial to [
]
(Burst Shot 1) or [
] (Burst
Shot 2).
0
Configure the burst settings for each of
[
] and [
].
2
Select the burst rate.
≥
¨
[
]
¨
[
]
¨
[Burst Shot
1 Setting]/[Burst Shot 2 Setting]
0
With the default settings, [H] is set for
[
] and [
] is set for [
].
3
Close the menu.
≥
Press the shutter button halfway.
4
Start recording.
0
Takes burst pictures while the shutter
button is pressed fully.
Taking Burst Pictures
[
]
For information about 6K/4K photo recording, refer to “6K/4K Photo
Recording”. (
[H]
Takes high-speed burst pictures.
[M]
Takes medium-speed burst pictures.
[L]
Takes low-speed burst pictures.
