Advanced (Recording pictures)
- 120 -
For details on [REC] Mode menu settings, refer to
Type of optical measurement to measure brightness can be changed.
Applicable modes:
Note
• When [
C
] is selected and [AF MODE] is set to [
š
], the camera will adjust the exposure to suit
the person’s face.
For details on [REC] Mode menu settings, refer to
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to real life.
Applicable modes:
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
• Even when the [SENSITIVITY] is set to [ISO100], [SENSITIVITY] may be set higher than
[ISO100] if the picture is taken with [I.EXPOSURE] set to valid.
• Compensation effect may not be achieved depending on the conditions.
• [
] in the screen turns to yellow when [I.EXPOSURE] is in effect.
• [LOW], [STANDARD], or [HIGH] represents the maximum range of effect.
[METERING MODE]
[
C
]:
Multiple
This is the method in which the camera measures the most
suitable exposure by judging the allocation of brightness on the
whole screen automatically. Usually, we recommend using this
method.
[
]:
Centre weighted
This is the method used to focus on the subject on the centre
of the screen and measure the whole screen evenly.
[
Ù
]:
Spot
This is the method to measure the subject in the spot metering
target
A
.
[I.EXPOSURE]
